###
有色金属(冶炼部分):2011,(11):34-37
本文二维码信息
码上扫一扫!
氧化铝回转窑熟料烧结过程影响参数研究
(武汉科技大学冶金工程系)
Study on Influencing Parameters of Clinker Sintering Process in Alumina Rotary Kiln
(Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Wuhan University of Science and Technology)
摘要
图/表
参考文献
相似文献
本文已被:浏览 3412次   下载 58次
投稿时间:2011-05-16               
中文摘要: 在对氧化铝熟料烧结过程进行分析的基础上,结合煤粉燃烧、物料热解、窑壁散热和窑内传热传质方程,建立了回转窑熟料烧结传热综合数学模型。在此基础上,利用现场实际参数,应用数值计算方法对模型进行计算求解,得到了氧化铝回转窑内气体和物料的轴向温度分布,并分析了熟料烧结过程中空气消耗系数和掺煤量等主要参数对窑内温度分布的影响,提出了相应的操作参数,为实现回转窑的操作优化和自动控制提供了可靠的依据,有利于实现回转窑生产的节能降耗。
Abstract:Based on the analysis of alumina clinker sintering process in combination with pulverized coal combustion, material pyrogenation, cooling of furnace wall finally, and heat transfer and mass transport equations, the combined heat transfer mathematical model for rotary kiln clinker sintering was built up. According to the in-site real operation parameters, the model was solved numerically for an alumina rotary kiln to predict the temperature profiles of gas and material in the axial direction. With this model through the analysis of the effect of main parameters such as coefficient of combustion air and additive coal on the temperature profiles in alumina clinker sintering process, the operating optimization parameters were presented. These parameters could provide reliable data for the operation optimization and automatic control and realize the improving production capacity and reduced energy consumption of the rotary kiln.
文章编号:     中图分类号:    文献标志码:
基金项目:国家教育部博士点基金项目(20010533009)
引用文本:
易正明.氧化铝回转窑熟料烧结过程影响参数研究[J].有色金属(冶炼部分),2011(11):34-37.
YI Zheng-ming.Study on Influencing Parameters of Clinker Sintering Process in Alumina Rotary Kiln[J].Nonferrous Metals (Extractive Metallurgy),2011(11):34-37.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号