###
有色金属(冶炼部分):2021,(5):128-131
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
萃取皂化废水除COD制工业盐工艺研究
刘少葵, 刘勇奇, 曹太鹏, 唐明洁
(湖南邦普循环科技有限公司 湖南 长沙 410600)
Study on Technology of Preparing Industrial Salt by Removing COD from Extraction Saponification Wastewater
Liu Shao-kui, Liu Yong-qi, Cao Tai-peng, TANG Ming-jie
(Hunan Brunp Recycling Technology Co., Ltd)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2198次   下载 2146次
投稿时间:2020-11-24     修订日期:2020-12-15     录用日期:2020-12-16     网络发布日期:2021-04-20
中文摘要: 研究了皂化废水中含油量、COD浓度对皂化废水结晶盐的品质影响和Fenton氧化法降解COD工艺。结果表明,经活性炭除油后,含油量小于5 mg/L;在摩尔比n(H2O2)/n(Fe2+)=8、反应pH=3.0、双氧水浓度0.472 mmol/L、反应时间60 min的条件下,COD浓度小于217 mg/L。经上述工艺处理后的皂化水用氢氧化钠沉淀除铁,蒸发结晶可以得到白度为87.52、氯化钠纯度为95.7%、达到一级标准的工业级氯化钠盐。
中文关键词: Fenton氧化  萃取皂化废水  蒸发结晶  制盐  COD
Abstract:Effects of oil content and COD concentration in saponification wastewater on quality of saponification wastewater crystal salt and Fenton oxidation degradation process of COD were studied. The results show that oil content is less than 5 mg/L after degreasing by activated carbon. COD concentration is less than 217 mg/L under the conditions including mole ratio of n(H2O2)/n(Fe2+)=8, reaction pH value of 3.0, hydrogen peroxide concentration of 0.472 mmol/L, and reaction time of 60 min. Saponified water treated by the above process is precipitated with sodium hydroxide to remove iron, and evaporative crystallization can obtain industrial-grade sodium chloride salt with whiteness of 87.52, purity of sodium chloride of 95.7%, and reaches first-class standard.
文章编号:     中图分类号:    文献标志码:
基金项目:国家重点研发计划项目(2018YFC1901801);宁乡市科技重大专项项目NXKJ-ZDZX-(201807)
引用文本:
刘少葵,刘勇奇,曹太鹏,唐明洁.萃取皂化废水除COD制工业盐工艺研究[J].有色金属(冶炼部分),2021(5):128-131.
Liu Shao-kui,Liu Yong-qi,Cao Tai-peng,TANG Ming-jie.Study on Technology of Preparing Industrial Salt by Removing COD from Extraction Saponification Wastewater[J].Nonferrous Metals (Extractive Metallurgy),2021(5):128-131.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号