###
有色金属(冶炼部分):2018,(5):74-78
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
工艺过程水中油的高效脱除试验
尹一男,王海北
(北京矿冶研究总院,北京矿冶研究总院)
Experimental Study on Efficient Removal of Oil from Process Water
Yin Yinan and Wang Haibei
(Beijing General Research Institute of Mining and Metallurgy,)
摘要
图/表
参考文献
相似文献
本文已被:浏览 1903次   下载 2058次
投稿时间:2017-11-16     修订日期:2017-11-17     录用日期:2017-11-20     网络发布日期:2018-04-16
中文摘要: 以铀钼矿酸浸—萃取工艺的过程水为研究对象,采用北京矿冶科技集团有限公司自主开发的BGS102除油树脂,针对酸性萃余液进行深度除油处理,以砂滤作为前置过滤,降浊并除去大部分油质,减缓对树脂的消耗,再以110 mL/min的进液速度通过树脂柱,进行深度除油,除油后萃余液油含量低于10 mg/L,回收有机相,降低系统消耗;BGS102树脂经反洗再生15次后,除油率保持在90%以上,干树脂油吸附饱和容量为93 mg/g。
中文关键词: 工艺水  吸附  除油
Abstract:Efficient removal of oil from process water of acid raffinate was conducted by BGS102 degreasing resin developed by BGRIMM Technology Group with process water of uranium-molybdenum deposit by acid leaching and extraction process as the research object. With sand filtration as prefiltration, turbidity and most of oil was removed, and depth oil removal was performed by adding raffinate into resin column with flow rate of 110 mL/min. Oil content in deoilled raffinate is 10 mg/L below, and organic phase was recovered to reduce system consumption. After 15-time of regeneration for BGS102 resin, oil removal rate is 90% above, and oil adsorption saturated capacity on BGS102 dry resin is 93 mg/g.
文章编号:     中图分类号:X703 ;X758    文献标志码:
基金项目:北京矿冶研究总院科研基金项目(院重大02-1428)
引用文本:
尹一男,王海北.工艺过程水中油的高效脱除试验[J].有色金属(冶炼部分),2018(5):74-78.
Yin Yinan,Wang Haibei.Experimental Study on Efficient Removal of Oil from Process Water[J].Nonferrous Metals (Extractive Metallurgy),2018(5):74-78.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号