###
有色金属(冶炼部分):2011,(9):33-35
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
5Cu/(10NiO-NiFe2O4)金属陶瓷惰性阳极钠钾混合电解质电解腐蚀研究
(广西师范大学化学化工学院)
Electrolytic Corrosion of 5Cu/(10NiO-NiFe2O4) Inert Anode in Mixture of Na3AlF6-K3AlF6
(School of Chemistry & Chemical Engineering, Guangxi Normal University)
摘要
图/表
参考文献
相似文献
本文已被:浏览 3503次   下载 61次
投稿时间:2011-03-30               
中文摘要: 采用传统粉末冶金技术制备了铝电解用5Cu/(NiFe2O4-10NiO)金属陶瓷惰性阳极,对其在钠钾冰晶石混合冰晶石中进行电解腐蚀。研究结果表明,从微观来看,阳极存在腐蚀现象。电解过程的槽电压波动剧烈。Fe、Ni和Cu组元的平衡浓度分别为150×10-6、42×10-6及40×10-6,腐蚀速率比常规电解条件下的低。
Abstract:The 5Cu/(NiFe2O4-10NiO) cermet inert anode was developed by classical powder metallurgical technique. The corrosion behaviors of NiFe2O4-based inert anodes in Na3AlF6-K3AlF6 melts were investigated. The results show that the anode had corrosion phenomenon in micro-morphology. Cell voltage fluctuated remarkably during electrolysis. The equilibrium concentration of Fe, Ni, and Cu were 150×10-6, 42×10-6 and 40×10-6, respectively, and the corrosion rate was lower than that in tradition electrolysis conditions.
文章编号:     中图分类号:    文献标志码:
基金项目:国家自然科学基金资助项目(21063003;20663001)
引用文本:
黄有国,李庆余,王红强.5Cu/(10NiO-NiFe2O4)金属陶瓷惰性阳极钠钾混合电解质电解腐蚀研究[J].有色金属(冶炼部分),2011(9):33-35.
HUANG You-guo,LI Qing-yu,WANG Hong-qiang.Electrolytic Corrosion of 5Cu/(10NiO-NiFe2O4) Inert Anode in Mixture of Na3AlF6-K3AlF6[J].Nonferrous Metals (Extractive Metallurgy),2011(9):33-35.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号