###
有色金属(冶炼部分):2011,(9):47-51
本文二维码信息
码上扫一扫!
合金元素对Al-Si合金力学性能及组织的影响
(1.江苏大学材料科学与工程学院;2.苏州明智科技有限公司)
Effect of Alloying Elements on Mechanical Properties and Microstructure of Al-Si Alloy
(1.School of Materials Science and Engineering, Jiangsu University;2.Suzhou Mingzhi Technology Company Limited)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2592次   下载 55次
投稿时间:2011-03-30               
中文摘要: 采用正交试验方法研究Ni、Cr及Zn三种合金元素对Al-7.5Si-3.5Cu-0.35Mg亚共晶铸造铝硅合金力学性能影响,并用SEM和EDX对加入微量合金后的铸态组织进行观察与分析。结果表明,最优配比为Ni0.02Cr0.03Zn0.2。在合金铸态组织中,Ni、Cr、Zn元素形成复杂的灰白色短棒状或粒状ω相,中和了Fe的有害作用,并且在合金拉伸变形时,可以阻碍位错的运动,对合金基体有一定的强化作用。
Abstract:Orthogonal experimental method was used to study Ni、Cr and Zn on mechanical properties of Al-7.5Si-3.5Cu-0.35Mg hypoeutectic cast Al-Si alloy. The cast structure of adding micro-alloying was observed and analyzed with SEM and EDX. The results show that the best ratio of orthogonal experimental is Ni0.02Cr0.03Zn0.2. In the cast structure, Ni, Cr and Zn alloying elements come into complicated white short-rod-like and granular ω phase, counteracting the harmful effect of Fe, and impede dislocation movement in alloy tensile deformation, and has a certain strengthening effect on the alloy substrate.
文章编号:     中图分类号:    文献标志码:
基金项目:科技部科技型中小企业技术创新基金项目(09C26213201044);江苏省科技型中小企业技术创新资金项目(BC2007144)
引用文本:
司乃潮,马得勇,吴勤方,孙少纯,刘光磊,华雄飞.合金元素对Al-Si合金力学性能及组织的影响[J].有色金属(冶炼部分),2011(9):47-51.
SI Nai-chao,MA De-yong,WU Qing-fang,SUN Shao-Chun,LIU Guang-lei,HUA Xiong-Fei.Effect of Alloying Elements on Mechanical Properties and Microstructure of Al-Si Alloy[J].Nonferrous Metals (Extractive Metallurgy),2011(9):47-51.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号