###
有色金属(冶炼部分):2022,(8):1-6
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
锌浸出渣-低品位氧硫铅锌矿富氧侧吹熔池熔炼渣型理论研究
刘家豪1,2,3, 杨坤1,2,3, 胡途1,2, 吕婷婷4, 贺磊4, 高丽4
(1.昆明理工大学 冶金与能源工程学院;2.云南省非常规冶金重点实验室;3.省部共建复杂有色金属资源清洁利用国家重点实验室;4.昆明理工大学)
Theoretical Study on Smelting Slag Type of Zinc Leached Slag Combined with Low Grade Zinc Oxide Ore in Oxygen-Rich Side Blowing Bath
摘要
图/表
参考文献
相似文献
本文已被:浏览 2336次   下载 1915次
投稿时间:2022-04-01     修订日期:2022-04-08     录用日期:2022-04-13     网络发布日期:2022-07-13
中文摘要: 锌浸出渣-低品位氧硫铅锌矿富氧侧吹熔池熔炼工艺可实现低品位氧硫铅锌矿的高效利用,但目前存在能耗高、生产率低的问题,主要是由于熔渣熔化温度高、流动性差。采用Factsage热力学软件,通过计算研究不同熔渣成分对熔渣熔化温度的影响。结果表明,熔渣的熔化温度随着渣矿质量比的减小而逐渐增大;在同一渣矿质量比下,二元碱度对熔渣熔化温度影响巨大,其随着碱度减小呈现先降低后升高的趋势。当渣矿质量比为3.07、w(CaO)/w(SiO2)=0.5时,熔渣熔化温度达到最低值1 327 ℃。
Abstract:The oxygen enriched side blowing bath smelting of zinc leaching residue and low grade oxygen sulfur lead-zinc ore can realize the efficient utilization of low-grade oxygen sulfur lead-zinc ore. At present, there are problems of high energy consumption and low productivity due to high melting temperature and low fluidity of slag. Factage thermodynamic software was used to study the influence of slag composition on slag melting temperature through calculation. The results show that the melting temperature of slag rises gradually with the decrease of mass ratio of slag to ore. Under the same slag ore mass ratio, binary alkalinity has a great influence on the melting temperature of slag, which drops first and then rises with the decrease of alkalinity. When the mass ratio of slag to ore is 3.07 and w(CaO)/w(SiO2)=0.5, the melting temperature of slag reaches the lowest value of 1 327 ℃.
文章编号:     中图分类号:    文献标志码:
基金项目:云南省中青年学术和技术带头人后备人才项目(202005AC160033);云南省万人计划“青年拔尖人才”项目(YNWRQNBJ-2019-222)
引用文本:
刘家豪,杨坤,胡途,吕婷婷,贺磊,高丽.锌浸出渣-低品位氧硫铅锌矿富氧侧吹熔池熔炼渣型理论研究[J].有色金属(冶炼部分),2022(8):1-6.
LIU Jia-hao,YANG Kun,HU Tu,LYU Ting-ting,HE Lei,GAO Li.Theoretical Study on Smelting Slag Type of Zinc Leached Slag Combined with Low Grade Zinc Oxide Ore in Oxygen-Rich Side Blowing Bath[J].Nonferrous Metals (Extractive Metallurgy),2022(8):1-6.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号