###
有色金属(冶炼部分):2022,(3):77-82
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
倾动炉智能钢模研究及应用实践
朱飞军, 康有才, 陈勇, 刘科
(江铜集团贵溪冶炼厂)
Research and Application of Intelligent Steel Mould for Tilting Furnace
ZHU Fei-jun, KANG You-cai, CHEN Yong, LIU Ke
(JCC Guixi Smelter,Guixi)
摘要
图/表
参考文献
相似文献
本文已被:浏览 1983次   下载 1864次
投稿时间:2021-11-27     修订日期:2021-11-27     录用日期:2021-12-07     网络发布日期:2022-02-18
中文摘要: 目前国内铜阳极板浇铸主要采用铁模和铜模,且钢模应用较少。钢模具有变形量小、模面耐冲刷性好、脱模剂消耗量少等优点,但是钢模也存在加工成本高、使用寿命短等缺点。倾动炉针对钢模的缺点对钢模材质、钢模结构、冷却水系统、喷涂系统、浇铸系统等进行了创新及智能控制优化。通过以上技术创新,在保证阳极板物理合格率的基础上提高了钢模寿命,降低了硫酸钡单耗,钢模成本竞争能力得到提高。
中文关键词: 倾动炉  钢模  寿命  铜阳极板  硫酸钡  智能
Abstract:At present, iron mould and copper mould are mainly used for casting copper anode plate in China, while steel mould is seldom used. Steel mould has the advantages of small deformation, good erosion resistance and less consumption of release agent, but it also has the disadvantages of high processing cost and short service life. The tilting furnace innovates and optimizes the steel mold material, steel mold structure, cooling water system, spraying system, and casting system. Through the above technical innovation, on the basis of ensuring physical qualified rate of anode plate, the service life of steel mould is increased, the unit consumption of barium sulfate is reduced, and the cost competitiveness of steel mould is improved.
文章编号:     中图分类号:    文献标志码:
基金项目:无
Author NameAffiliationE-mail
ZHU Fei-jun JCC Guixi Smelter,Guixi zhufeijun@126.com 
KANG You-cai   
CHEN Yong   
LIU Ke   
引用文本:
朱飞军,康有才,陈勇,刘科.倾动炉智能钢模研究及应用实践[J].有色金属(冶炼部分),2022(3):77-82.
ZHU Fei-jun,KANG You-cai,CHEN Yong,LIU Ke.Research and Application of Intelligent Steel Mould for Tilting Furnace[J].Nonferrous Metals (Extractive Metallurgy),2022(3):77-82.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号