###
有色金属(冶炼部分):2022,(3):18-21
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
闪速炉炼铜离线冶金数学模型软件的开发
曾省光
(江西贵溪冶炼厂)
Development of Off-Line Metallurgical Mathematical Model Software for Copper Smelting in Flash Furnace
ZENG Sheng-Guang
(Guixi smelter)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2231次   下载 1973次
投稿时间:2021-11-23     修订日期:2021-11-23     录用日期:2021-11-29     网络发布日期:2022-02-18
中文摘要: 以闪速炼铜为研究对象,基于铜冶炼的金属平衡、热平衡理论基础,构建了炉渣、冰铜品位和冰铜温度等控制变量,以及熔剂、工艺风、氧量、重油等操作变量,开发了与在线数学模型功能一致的闪速炼铜离线数学模型。经过2年闪速炉现场600多组数据的验证,在基于同等工艺条件下,由本软件计算的石英矿比率值、工艺风量、氧气量、重油量与在线控制系统计算值误差在0.02%以内。
中文关键词: 铜  闪速炉  控制  离线  数学模型
Abstract:Based on theoretical basis of metal balance and heat balance of copper smelting, control variables such as slag, matte grade and matte temperature, as well as the operation variables such as flux, process air, oxygen content and heavy oil were constructed. An off-line mathematical model for copper flash smelting was developed, which has the same function as the on-line mathematical model. After two years of verification of more than 600 groups of data on flash furnace, under the same process conditions, the error between quartz ore ratio, process air volume, oxygen volume and heavy oil volume calculated by this software and the calculated value of the on-line control system is within 0.02%.
文章编号:     中图分类号:    文献标志码:
基金项目:无
Author NameAffiliationE-mail
ZENG Sheng-Guang Guixi smelter 1085286535@qq.com 
引用文本:
曾省光.闪速炉炼铜离线冶金数学模型软件的开发[J].有色金属(冶炼部分),2022(3):18-21.
ZENG Sheng-Guang.Development of Off-Line Metallurgical Mathematical Model Software for Copper Smelting in Flash Furnace[J].Nonferrous Metals (Extractive Metallurgy),2022(3):18-21.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号