本文已被:浏览 2067次 下载 1959次
投稿时间:2021-08-14 修订日期:2021-08-24 录用日期:2021-08-25 网络发布日期:2021-11-19
投稿时间:2021-08-14 修订日期:2021-08-24 录用日期:2021-08-25 网络发布日期:2021-11-19
中文摘要: 基于对30 kA电解槽流场、电磁场、电热场的研究,利用得到的电流强度与结构参数的关系,对40 kA电解槽进行结构参数优化,得到最优40 kA电解槽槽型。经电—热—磁—流场耦合研究,对比30 kA电解槽流场、电磁场、电热场分布。结果表明,优化后的40 kA电解槽电阻电压降低了0.33 V,电解槽中电解液温度分布变化并不明显,磁场强度的增幅均在10%以内,流场分布中涡流范围有所减少。在能量平衡条件下,40 kA电解槽磁流场分布相对30 kA电解槽更加稳定。
Abstract:Based on study of flow field, the electro-magnetic field, and electro-thermal field of 30 kA electrolytic cell, the structural parameters of 40kA electrolysis cell were optimized using relationship between current intensity and structural parameters from 30 kA electrolytic cell. Distribution of flow field, electro-magnetic field and electric- thermal field in 30 kA electrolytic cell was compared through the coupling study of electric-heat-magnetic-flow field in 40 kA electrolytic cell. The results show that resistance voltage of the optimized 40 kA electrolytic cell reduces 0.33 V. Temperature distribution of electrolyte in electrolytic cell does not change obviously. Increase of magnetic field strength is less than 10%. Eddy current range of flow field reduces. The coupling study of electro-thermal-magnetic-flow field proves that magnetic-flow field distribution of the optimized 40 kA electrolytic cell is more stable than that of 30kA electrolysis cell under the condition of energy balance.
文章编号: 中图分类号: 文献标志码:
基金项目:国家重点研发计划项目(2018YFC0604806)
| 作者 | 单位 | |
| 吴荔荔 | 华东理工大学 | 2582900029@qq.com |
| 李文英 | 华东理工大学 | lwynxu@163.com |
| 路贵民* | 华东理工大学 | gmlu@ecust.edu.cn |
引用文本:
吴荔荔,李文英,路贵民.锂电解槽多物理场耦合模拟[J].有色金属(冶炼部分),2021(12):42-50.
WU Li-li,LI Wen-ying,LU Gui-min.Multi-physics Coupling Simulation of Lithium Electrolysis Cell[J].Nonferrous Metals (Extractive Metallurgy),2021(12):42-50.
吴荔荔,李文英,路贵民.锂电解槽多物理场耦合模拟[J].有色金属(冶炼部分),2021(12):42-50.
WU Li-li,LI Wen-ying,LU Gui-min.Multi-physics Coupling Simulation of Lithium Electrolysis Cell[J].Nonferrous Metals (Extractive Metallurgy),2021(12):42-50.

关注微信公众号