###
有色金属(冶炼部分):2021,(9):68-74
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
细粒合金加压浸出富集贵金属工艺研究
欧晓健1, 李全1, 张建玲1, 郭金权1, 马磊2
(1.金川集团股份有限公司 镍钴资源综合利用国家重点实验室 甘肃金昌;2.金川集团股份有限公司 镍冶炼厂)
Study on Pressure Leaching Technology for Enrichment of Precious Metals from Fine-Grained Alloys
摘要
图/表
参考文献
相似文献
本文已被:浏览 2178次   下载 1815次
投稿时间:2021-03-22     修订日期:2021-04-13     录用日期:2021-04-14     网络发布日期:2021-08-27
中文摘要: 以镍精矿中磁选细粒合金为原料,通过常压、加压浸出细粒合金中的镍、铜、钴,加压碱浸分离二氧化硅,实现了细粒合金中贵贱金属分离及贵金属富集的目的。试验确定了处理工艺路线和最佳工艺参数,镍、钴回收率≥99%,脱硅率80%以上,全流程渣率0.6%~0.8%,贵金属直收率≥99%,贵金属可富集100倍以上。
中文关键词: 细粒合金  加压浸出  富集  贵金属
Abstract:Nickel, copper and cobalt in fine-grained alloy by magnetic separation of nickel concentrate were leached under normal pressure and high pressure, and SiO2 was separated by high-pressure alkaline leaching, which realized separation and enrichment of precious and base metals in fine-grained alloys. Under the optimum conditions, recovery rate of nickel and cobalt is ≥99%, desilication rate is 80% above, whole process slag rate is 0.6%—0.8%, recovery rate of precious metals is ≥99%, and precious metals can be enriched more than 100 times.
文章编号:     中图分类号:    文献标志码:
基金项目:国家重点研发计划项目(2018YFC1901600)
引用文本:
欧晓健,李全,张建玲,郭金权,马磊.细粒合金加压浸出富集贵金属工艺研究[J].有色金属(冶炼部分),2021(9):68-74.
OU Xiao-jian,LI Quan,ZHANG Jian-ling,GUO Jin-quan,MA Lei.Study on Pressure Leaching Technology for Enrichment of Precious Metals from Fine-Grained Alloys[J].Nonferrous Metals (Extractive Metallurgy),2021(9):68-74.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号