本文已被：浏览 2054次 下载 2108次
投稿时间：2020-11-23 修订日期：2020-12-14 录用日期：2020-12-15 网络发布日期：2021-04-20
投稿时间：2020-11-23 修订日期：2020-12-14 录用日期：2020-12-15 网络发布日期：2021-04-20
中文摘要: 从热力学理论出发，模拟计算了碱矿比、富氧浓度、残氧率、焙烧温度等因素对某含多金属复杂金精矿金、银、铜提取的影响，并通过独立反应的热力学平衡关系确定物质之间的含量关系，从而确定了复杂金精矿氢氧化钠焙烧的反应机制。结果表明，焙烧最优条件为：碱矿比10%、富氧浓度25%、残氧率5%、焙烧温度630 ℃。通过正交试验对热力学条件进行验证，在最优条件下焙烧3 h，焙砂进行硫酸浸出—氰化工序，在此条件下，金、银、铜的提取率分别为95.92%、84.24%、92.57%。
Abstract:Based on thermodynamic theory, effects of alkali-ore ratio, oxygen concentration, residual oxygen rate, and roasting temperature on extraction of gold, silver, and copper from a complex gold concentrate containing multiple metals were simulated and calculated. Content relationship between substances through thermodynamic equilibrium relationship of independent reactions was determined. Reaction mechanism of sodium hydroxide roasting in complex gold ore was determined. The results show that the optimum roasting conditions include alkali-to-ore ratio of 10%, oxygen concentration of 25%, residual oxygen rate of 5%, and calcination temperature of 630 ℃. Thermodynamic conditions are verified by orthogonal experiment. Complex gold concentrate is roasted for 3 h under the optimum conditions followed by sulfuric acid leaching-cyanide process. Under these conditions, extraction rate of gold, silver and copper is 95.92%, 84.24% and 92.57%, respectively.
文章编号： 中图分类号： 文献标志码：
基金项目:国家自然科学基金资助项目(51564021)；江西省自然科学基金资助项目(20151BAB206028)
引用文本：
王瑞祥,周杰,刘茶香,杨裕东,李明周,袁远亮,王艳阳,徐志峰.复杂金精矿-NaOH-O2系热力学分析及应用[J].有色金属（冶炼部分）,2021(5):67-78.
WANG Rui-xiang,ZHOU Jie,LIU Cha-xiang,YANG Yu-dong,LI Ming-zhou,YUAN Yuan-liang,WANG Yan-yang,XU Zhi-feng.Thermodynamic Analysis and Application of Complex Gold Concentrate-NaOH-O2 System[J].Nonferrous Metals (Extractive Metallurgy),2021(5):67-78.
王瑞祥,周杰,刘茶香,杨裕东,李明周,袁远亮,王艳阳,徐志峰.复杂金精矿-NaOH-O2系热力学分析及应用[J].有色金属（冶炼部分）,2021(5):67-78.
WANG Rui-xiang,ZHOU Jie,LIU Cha-xiang,YANG Yu-dong,LI Ming-zhou,YUAN Yuan-liang,WANG Yan-yang,XU Zhi-feng.Thermodynamic Analysis and Application of Complex Gold Concentrate-NaOH-O2 System[J].Nonferrous Metals (Extractive Metallurgy),2021(5):67-78.
关注微信公众号