本文已被:浏览 2394次 下载 2282次
投稿时间:2019-04-03 修订日期:2019-04-08 录用日期:2019-04-09 网络发布日期:2019-09-23
投稿时间:2019-04-03 修订日期:2019-04-08 录用日期:2019-04-09 网络发布日期:2019-09-23
中文摘要: 对刚果(金)某氧化铜钴矿进行絮凝沉降试验研究。结果表明,原矿在磨矿粒度-0.150 mm占80%、矿浆浓度10%~12%、絮凝剂用量5~10 g/t,絮凝剂浓度0.05%~0.1%的条件下,沉降速度最高可达25 m/h,底流浓度可达54%以上。对于磨矿粒度-0.150 mm占80%、酸矿比132 kg/t、初始矿浆浓度25%、常温浸出时间4 h的浸出矿浆,在矿浆浓度6%、絮凝剂用量20 g/t,絮凝剂浓度0.1%的条件下,沉降速度最高可达22 m/h,底流浓度可达47%以上。
Abstract:Flocculating setting process of Cu-Co oxidized concentrate from Dr Congo was experimental studied. The results show that settling velocity and solid concentration of under-flow of raw ore slurry is 25 m/h and 54% above respectively under the conditions including granularity of -0.150 mm of 80%, slurry concentration of 10%-12%, flocculant dosage of 5-10 g/t, and flocculant concentration of 0.05%-0.1%. Settling velocity and solid concentration of under-flow of slurry leached at ambient temperature for 4 h is 22 m/h and 47% above respectively with granularity of -0.150 mm of 80%, initial solid concentration of 25% and ratio of mine to ore of 132 kg/t under the conditions including slurry concentration of 6%, flocculant dosage of 20 g/t and flocculant concentration of 0.1%.
文章编号: 中图分类号: 文献标志码:
基金项目:科技部创新方法工作专项(2017IM060200)
| 作者 | 单位 | |
| 陈露露* | 北京矿冶科技集团有限公司 | 974435875@qq.com |
| 郑朝振 | 北京矿冶科技集团有限公司 | |
| 李贺 | 北京矿冶科技集团有限公司 | |
| 李相良 | 北京矿冶科技集团有限公司 | |
| 刘三平 | 北京矿冶科技集团有限公司 |
| Author Name | Affiliation | |
| CHEN LULU | BGRIMM Technology | 974435875@qq.com |
| Zheng Chaozhen | ||
| Li He | ||
| Li Xiangliang | ||
| Liu Sanping |
引用文本:
陈露露,郑朝振,李贺,李相良,刘三平.刚果(金)某氧化铜钴矿絮凝沉降试验研究[J].有色金属(冶炼部分),2019(10):26-29.
CHEN LULU,Zheng Chaozhen,Li He,Li Xiangliang,Liu Sanping.Study on Flocculating Setting Process for Cu-Co Oxidized Concentrate from Dr Congo[J].Nonferrous Metals (Extractive Metallurgy),2019(10):26-29.
陈露露,郑朝振,李贺,李相良,刘三平.刚果(金)某氧化铜钴矿絮凝沉降试验研究[J].有色金属(冶炼部分),2019(10):26-29.
CHEN LULU,Zheng Chaozhen,Li He,Li Xiangliang,Liu Sanping.Study on Flocculating Setting Process for Cu-Co Oxidized Concentrate from Dr Congo[J].Nonferrous Metals (Extractive Metallurgy),2019(10):26-29.

关注微信公众号