本文已被:浏览 2243次 下载 3147次
投稿时间:2017-11-10 修订日期:2017-11-14 录用日期:2017-11-15 网络发布日期:2018-04-16
投稿时间:2017-11-10 修订日期:2017-11-14 录用日期:2017-11-15 网络发布日期:2018-04-16
中文摘要: 对420 kA大型铝电解槽槽上部集气烟道的结构优化与改造进行了研究。利用FLUENT软件对某公司420 kA电解槽V形单烟道内烟气流动状况进行了仿真模拟,获得了烟气在出口压力设定为-400 Pa时电解槽槽腔以及集气烟道内的速度场、压力场的分布情况。针对其不足,将其优化改造为上位双烟道分区集气结构,通过模拟计算结果和生产现场实际数据进行对比,仿真结果正确可靠。优化改造后的烟道集气效果较好,可实现烟道集气均匀,能提高烟道集气效率,可实现电解槽的节能降耗。通过进一步模拟计算获知,当优化改造后的烟道出口压力调节至-300 Pa时即可满足生产和设计要求。
Abstract:Structure optimization and improvement of flue in upper part of 420 kA large-scale aluminum reduction cells were investigated. The FLUENT software was used to simulate fume flow in V-shaped single flue. Distribution of velocity field and pressure field in cavity of aluminum reduction cells and flue are obtained when outlet pressure is set at -400 Pa. V-shaped single flue is transformed into upper dual flue with fume covering different areas after analyzing deficiencies of V-shaped single flue’s structure. Comparison with real data in production field shows simulation results are correct and reliable. The modified flue has better fume collection effect, which can homogenize the fume, improve gas collection efficiency and reduce energy consumption of aluminum reduction cells. Further numerical simulation shows that requirements of production and design can be satisfied when outlet pressure is adjusted to -300 Pa.
文章编号: 中图分类号:TF821 文献标志码:
基金项目:国家高技术研究发展计划(863计划)项目(2013AA065103)
| 作者 | 单位 | |
| 黄安宁* | 重庆旗能电铝有限公司 | freeuse2010@163.com |
| 易智民 | 重庆旗能电铝有限公司 | |
| 张利军 | 重庆旗能电铝有限公司 |
| Author Name | Affiliation | |
| HUANG An-ning | Chongqing Qineng Electricity and Aluminum Co.,Ltd. | freeuse2010@163.com |
| YI Zhi-min | ||
| ZHANG Li-jun |
引用文本:
黄安宁,易智民,张利军.420 kA大型铝电解槽槽上部集气烟道结构优化改造[J].有色金属(冶炼部分),2018(5):33-36.
HUANG An-ning,YI Zhi-min,ZHANG Li-jun.Optimization and Modification of Upper Flue Structure in 420 kA Large-Scale Aluminum Reduction Cells[J].Nonferrous Metals (Extractive Metallurgy),2018(5):33-36.
黄安宁,易智民,张利军.420 kA大型铝电解槽槽上部集气烟道结构优化改造[J].有色金属(冶炼部分),2018(5):33-36.
HUANG An-ning,YI Zhi-min,ZHANG Li-jun.Optimization and Modification of Upper Flue Structure in 420 kA Large-Scale Aluminum Reduction Cells[J].Nonferrous Metals (Extractive Metallurgy),2018(5):33-36.

关注微信公众号