本文已被:浏览 2441次 下载 2433次
投稿时间:2017-11-01 修订日期:2017-11-10 录用日期:2017-11-14 网络发布日期:2018-04-16
投稿时间:2017-11-01 修订日期:2017-11-10 录用日期:2017-11-14 网络发布日期:2018-04-16
中文摘要: 利用碱性体系浸出废铅膏中的铅,分别探究了浸出时间、温度、NaOH浓度及固液比对铅浸出的影响。在单因素最佳条件下,通过Box-Behnken响应面优化探究了这4种因素对铅浸出的交互影响,经验证试验得到最佳浸出条件,并对最佳条件下浸出后的剩余固体做检测分析。结果表明,铅的最佳浸出条件为:浸出时间33 min、浸出温度75 ℃、NaOH浓度7 mol/L、固液比43(g/L);最佳条件下的铅浸出率为56.35%,浸出浓度为17.33 g/L,浸出后剩余固体主要为PbO2,可回收提纯后直接利用。
中文关键词: 碱性体系 铅膏 Box-Behnken响应面优化
Abstract:Alkaline medium system was used to leach lead from spent lead paste. Effects of leaching time, temperature, NaOH concentration, and ratio of solid to liquid (S/L) on lead leaching efficiency were investigated. The interactions of these four factors to dissolve lead ionic were investigated through Box-Behnken response surface optimization experiment. The results demonstrate that lead leaching rate is 56.35% with lead concentration of 17.33 g/L under the optimum conditions including leaching time of 33 min, leaching temperature of 75 ℃, NaOH concentration of 7 mol/L, and S/L=43 g/L. The remaining solids are mainly PbO2, which can be used directly after purification.
文章编号: 中图分类号:X705 文献标志码:
基金项目:国家自然科学基金资助项目(21767003);广西自然科学基金项目(2015GXNSFAA139232);广西大学科研基金项目(XJZ160938,XBZ110928)
| 作者 | 单位 | |
| 颜游子 | 广西大学资源环境与材料学院 | ZK@mail.gxu.cn |
| 黄魁* | 广西大学资源环境与材料学院 | khuang@gxu.edu.cn |
| 刘恒毅 | 广西大学资源环境与材料学院 | |
| 冯水清 | 广西大学资源环境与材料学院 | |
| 朱坤 | 广西大学资源环境与材料学院 | ZK@mail.gxu.cn |
| 董海丽 | 广西大学资源环境与材料学院 |
引用文本:
颜游子,黄魁,刘恒毅,冯水清,朱坤,董海丽.碱性体系浸出废铅膏中的铅[J].有色金属(冶炼部分),2018(5):10-16.
YAN Youzi,HUANG Kui,LIU Hengyi,FENG Shuiqing,ZHU Kun,DONG Haili.Lead Leaching from Spent Lead Paste with Alkaline Medium[J].Nonferrous Metals (Extractive Metallurgy),2018(5):10-16.
颜游子,黄魁,刘恒毅,冯水清,朱坤,董海丽.碱性体系浸出废铅膏中的铅[J].有色金属(冶炼部分),2018(5):10-16.
YAN Youzi,HUANG Kui,LIU Hengyi,FENG Shuiqing,ZHU Kun,DONG Haili.Lead Leaching from Spent Lead Paste with Alkaline Medium[J].Nonferrous Metals (Extractive Metallurgy),2018(5):10-16.

关注微信公众号