###
有色金属(冶炼部分):2018,(4):7-9
本文二维码信息
码上扫一扫!
铜转炉白烟尘加压浸出工艺研究
刘飞,洪育民,赵磊
(江西铜业集团公司贵溪冶炼厂,江西铜业集团公司贵溪冶炼厂,北京矿冶研究总院)
Study on Pressure Leaching of Copper Converter White Dust
LIU Fei,HONG Yu-min and ZHAO Lei
(Guixi Smelter,Jiangxi Copper Corporation,,)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2307次   下载 2537次
投稿时间:2017-10-17     修订日期:2017-10-17     录用日期:2017-10-23     网络发布日期:2018-03-20
中文摘要: 针对铜冶炼转炉白烟尘中有价金属的综合利用,开展了加压浸出工艺研究。在液固比6︰1(mL/g)、初始硫酸浓度0.6 mol/L、浸出温度120 ℃、氧分压0.6 MPa、浸出时间3 h、搅拌速度500 r/min的条件下,Cu、Zn浸出率均高于95%,Cd浸出率大于90%,As、Fe浸出率可以控制在10%以下。同步实现Cu、Zn、Cd高效浸出与As、Fe的抑制,有利于后续加压浸出液中的有价金属的分离。
中文关键词: 白烟尘  加压浸出  铜  砷  铁
Abstract:To realize comprehensive utilization of valuable metals in copper converter white dust, pressure leaching process was carried out. The results show that leaching rate of metals is Cu>95%, Zn>95%, Cd>90%, As<10%, Fe<10% under the optimum conditions including L/S of 6︰1(mg/L), initial sulfuric acid concentration of 0.6 mol/L, leaching temperature of 120 ℃, oxygen partial pressure of 0.6 MPa, leaching time of 3 h, and stirring speed of 500 r/min. Valuable elements of copper, zinc and cadmium can be effectively separated from impurities of arsenic and iron which facilitates separation of valuable metals in lixivium.
文章编号:     中图分类号:    文献标志码:
基金项目:国家高技术研究发展计划(863计划)项目(2013AA064002)
引用文本:
刘飞,洪育民,赵磊.铜转炉白烟尘加压浸出工艺研究[J].有色金属(冶炼部分),2018(4):7-9.
LIU Fei,HONG Yu-min,ZHAO Lei.Study on Pressure Leaching of Copper Converter White Dust[J].Nonferrous Metals (Extractive Metallurgy),2018(4):7-9.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号