###
有色金属(冶炼部分):2018,(1):25-28
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
高压水化法下高钛铝土矿的溶出性能
肖冲,金会心
(贵州大学材料与冶金学院,贵州大学材料与冶金学院)
Digestion Performance of High Titanium Bauxite under High Pressure Hydrochemical Process
xiaochong and jinhuixin
(College of Materials and Metallurge, Guizhou University,,)
摘要
图/表
参考文献
相似文献
本文已被:浏览 1913次   下载 2565次
投稿时间:2017-07-19     修订日期:2017-07-24     录用日期:2017-07-25     网络发布日期:2017-12-20
中文摘要: 采用单因素及正交试验方法研究了高压水化条件下溶出温度、粒度、搅拌强度以及石灰添加量对高钛铝土矿中Al2O3及TiO2溶出率的影响。结果表明,影响氧化铝溶出率的因素从大到小依次为温度、石灰添加量、搅拌强度、粒度。在下述最佳溶出条件下,Al2O3和TiO2实际溶出率分别为86.52%和5.708%:粒度0.045~0.074 mm、石灰添加量8%、溶出温度290 ℃、搅拌速度8 r/min、溶出时间45 min。
Abstract:Effects of digestion temperature, particle size, stirring strength, and lime dosage on dissolution rate of Al2O3 and TiO2 of high titanium bauxite in high pressure hydrochemical process were investigated by single factor terst and orthogonal test respectively. The results show that the factors influencing dissolution rate of alumina are in turn of temperature, lime dosage, stirring intensity, and particle size. Dissolution rate of Al2O3and TiO2 is 86.52% and 5.708% respectively under the optimum dissolution conditions including particle size of 0.045~0.074 mm, lime dosage of 8%, digestion temperature of 290 ℃, stirring speed of 8 r/min, and digestion duration of 45 min.
文章编号:     中图分类号:    文献标志码:
基金项目:国家自然科学基金资助项目(51564003);贵州省氧化铝生产工艺与技术科技创新人才团队项目(黔科合人才团队[2015]4005号)
引用文本:
肖冲,金会心,郑晓倩.高压水化法下高钛铝土矿的溶出性能[J].有色金属(冶炼部分),2018(1):25-28.
xiaochong,jinhuixin,ZHENG Xiao-qian.Digestion Performance of High Titanium Bauxite under High Pressure Hydrochemical Process[J].Nonferrous Metals (Extractive Metallurgy),2018(1):25-28.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号