本文已被:浏览 2731次 下载 2567次
投稿时间:2017-06-30 修订日期:2017-06-30 录用日期:2017-07-03 网络发布日期:2017-10-31
投稿时间:2017-06-30 修订日期:2017-06-30 录用日期:2017-07-03 网络发布日期:2017-10-31
中文摘要: 从安全生产、选矿工艺、不同渣型、同种渣型不同含铜量及水冷时间对渣包冷却制度要求进行分析探讨。结果表明,正常含铜闪速炉渣包及转炉渣包自然缓冷时间分别为10 h、28 h,总冷却时间分别为60 h、78 h;含铜高的闪速炉及转炉渣包自然缓冷时间分别为28 h、48 h,总冷却时间分别为78 h、90 h,并且所有渣包的渣包壁温度达到50 ℃以下再进行倒渣,能使倒渣中红包个数大大减少,减少渣包放炮事故的发生,优化后续选矿工艺指标。
Abstract:Requirement of cooling system for slag ladle was analyzed in terms of safe production, flotation process, slag type, copper content of slag, and duration of water-cooling. The results show that natural cooling time for flash smelting slag ladle and converter slag ladle with normal copper in slag is 10 h and 28 h respectively with total cooling time of 60 h and 78 h respectively. On the other hand, natural cooling time for flash smelting slag ladle and converter slag ladle with copper with higher content in slag is 28 h and 48 h respectively with total cooling time of 78 h and 90 h respectively. Deslagging operation upon external wall temperature of slag ladle of 50 ℃ below can reduce molten slag, prevent blasting accidents, and facilitate subsequent process index optimization.
keywords: copper smelting copper slag ladle cooling
文章编号: 中图分类号: 文献标志码:
基金项目:江西省教育厅科学技术研究项目(GJJ14413);福建省自然科学基金项目(2016J01252)
| 作者 | 单位 | |
| 李思勇* | 紫金铜业有限公司 | tongyelisiyong@126.com |
| Author Name | Affiliation | |
| Li Siyong | Zijin Copper Co. Ltd. | tongyelisiyong@126.com |
引用文本:
李思勇.铜冶炼渣包冷却制度的建立[J].有色金属(冶炼部分),2017(11):42-45.
Li Siyong.Establishment of Cooling System of Slag Ladle in Copper Smelter[J].Nonferrous Metals (Extractive Metallurgy),2017(11):42-45.
李思勇.铜冶炼渣包冷却制度的建立[J].有色金属(冶炼部分),2017(11):42-45.
Li Siyong.Establishment of Cooling System of Slag Ladle in Copper Smelter[J].Nonferrous Metals (Extractive Metallurgy),2017(11):42-45.

关注微信公众号