###
有色金属(冶炼部分):2017,(8):13-15
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
硫磺还原焙烧-酸浸法处理锰阳极泥
黎应芬,李祥,叶华,孔祥忠
(贵州理工学院 材料与冶金工程学院,贵州理工学院 材料与冶金工程学院,中南大学 化学与化工学院,中南大学 化学与化工学院)
Recovery of Manganese Anode Slimes by Sulfur Reduction Roasting-Acid Leaching Process
LI Ying-fen,LI Xiang,YE Hua and KONG Xiang-zhong
(College of Materials and Metallurgy Engineering,Guizhou Institute of Technology,,,)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2242次   下载 2020次
投稿时间:2017-03-20     修订日期:2017-03-30     录用日期:2017-03-30     网络发布日期:2017-07-17
中文摘要: 以硫磺为还原剂,硫酸溶液为浸出剂,通过火法—湿法耦合的方法提取电解锰阳极泥中的锰和尾渣富集铅。对硫磺用量、焙烧温度、焙烧时间、浸出温度、硫酸用量等工艺参数进行了探究。结果表明,当硫磺和锰阳极泥的质量比为1.0、焙烧温度300 ℃、焙烧时间60 min、硫酸和锰的摩尔比0.9、浸出温度25 ℃、浸出反应20 min时,锰的浸出率为98 %,尾渣含铅量30.5%。
中文关键词: 锰阳极泥  硫磺  硫酸  焙烧
Abstract:Manganese and lead were recovered from manganese anode slimes via reduction roasting-acid leaching process with sulfur as reductant and H2SO4 as leaching agent. The effects of sulfur dosage, roasting temperature, roasting time, leaching time, and H2SO4 dosage on manganese extraction and lead enrichment were investigated. The results show that manganese extraction rate is 98% and lead content in slag is 30.5% under the optimum conditions including mass rate of sulfur to manganese anode slimes of 1.0, roasting temperature of 300 ℃, roasting time of 60 min, molar rate of H2SO4 to manganese of 0.9, leaching temperature of 25 ℃, and leaching time of 20 min.
文章编号:     中图分类号:TF803.2    文献标志码:
基金项目:贵州省科学技术基金项目(黔科合J字[2014]2077号)
引用文本:
黎应芬,李祥,叶华,孔祥忠.硫磺还原焙烧-酸浸法处理锰阳极泥[J].有色金属(冶炼部分),2017(8):13-15.
LI Ying-fen,LI Xiang,YE Hua,KONG Xiang-zhong.Recovery of Manganese Anode Slimes by Sulfur Reduction Roasting-Acid Leaching Process[J].Nonferrous Metals (Extractive Metallurgy),2017(8):13-15.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号