###
有色金属(冶炼部分):2017,(7):35-40
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
基于线性规划算法的磷生铁最优化成分设计
梁玉冬,王力军,牛婷婷
(中国铝业股份有限公司郑州研究院,北京有色金属研究总院,中国铝业郑州有色金属研究院有限公司)
Optimization Composition Design of Phosphorus Cast Iron Based on Linear Programming
LiangYudong,wanglijun and NiuTingting
(Zhengzhou Non-ferrous Metals Research institute Co.,Ltd.,CHALCO,,)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2147次   下载 2214次
投稿时间:2017-03-01     修订日期:2017-03-07     录用日期:2017-03-08     网络发布日期:2017-06-19
中文摘要: 铝电解槽阳极组装用磷生铁在使用过程中需要的特性与其本体材料的物理性能息息相关。运用材料热力学的方法计算出五大元素(C,Si,P,Mn,S)的含量变化对磷生铁电导率和热膨胀系数的影响,并通过线性回归建立电导率和热膨胀系数与五大元素含量和温度的函数关系,最后利用线性规划最优化算法对某铝厂现行磷生铁成分进行有目的性的优化。通过优化后,磷生铁电导率最大优化率为14.50%,热膨胀系数最大优化率为5.99%。
Abstract:Characteristic of phosphorus cast iron required for anode assembly of aluminum electrolytic cell is closely related to physical properties of its body material. Effects of content changes of five elements (C, Si, P, Mn, S) on conductivity and coefficient of thermal expansion of phosphorus cast iron were calculated with method of material thermodynamics. Linear regression function between electrical conductivity, thermal expansion coefficient and content of five elements, temperature was established. Component of phosphorus cast iron in one aluminum manufacture was optimized with optimization algorithm of linear programming. The maximum optimization rate of conductivity of phosphorus cast iron is 14.50%, and the optimization rate of thermal expansion coefficient is 5.99% after optimization.
文章编号:     中图分类号:    文献标志码:
基金项目:河南省科技厅创新人才计划项目(114200510025)
引用文本:
梁玉冬,王力军,牛婷婷.基于线性规划算法的磷生铁最优化成分设计[J].有色金属(冶炼部分),2017(7):35-40.
LiangYudong,wanglijun,NiuTingting.Optimization Composition Design of Phosphorus Cast Iron Based on Linear Programming[J].Nonferrous Metals (Extractive Metallurgy),2017(7):35-40.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号