###
有色金属(冶炼部分):2017,(6):32-38
本文二维码信息
码上扫一扫!
基于电热场耦合条件下稀土电解槽电极结构优化模拟
伍永福,冯怀萱
(内蒙古科技大学,内蒙古科技大学)
Study on Matching of Electrode Insertion Depth and Spacing of Electrode of Rare Earth Electrolytic Cell with Numerical Simulation of Thermal-Electric Field Coupling
wuyongfu and fenghuaixuan
(Inner Mongolia University of Science&Technology,)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2013次   下载 1972次
投稿时间:2017-02-19     修订日期:2017-02-28     录用日期:2017-02-28     网络发布日期:2017-05-19
中文摘要: 以3 kA钕电解槽为研究模型,考虑到电热场在电解过程中的相互影响,运用COMSOL有限元模拟软件建立了的电热耦合模型,并对不同配比的电极插入深度、极间距进行仿真模拟。结果表明,在一定槽电压下,电极插入深度与极间距之间存在配比关系,配比关系影响电流和温度分布。电热场耦合后,在4.2 V槽电压下,电极插入深度为220 mm、极间距75 mm时的电流效率较高,电解过程更加稳定。
中文关键词: 稀土电解槽  钕  电热场  耦合  配比
Abstract:Coupling mathematical model of thermo-electric field was established by COMSOL finite element simulation software applying 3 kA neodymium electrolysis cell as models with consideration of correlation between electric field and thermal field. Electrode insertion depth and spacing of electrodes with different matching were simulated. The results show that there is a matching relationship between electrode insertion depth and spacing of electrodes which affects current and temperature distribution at certain cell voltage. High current efficiency is obtained under the conditions including electrode insertion depth of 220 mm, spacing of electrodes of 75 mm, and cell voltage of 4.0 V after thermo-electric field coupling.
文章编号:     中图分类号:    文献标志码:
基金项目:国家自然科学基金资助项目(51164025)
引用文本:
伍永福,冯怀萱,刘中兴,李言钦,官卜瑞.基于电热场耦合条件下稀土电解槽电极结构优化模拟[J].有色金属(冶炼部分),2017(6):32-38.
WU Yong-fu,FENG Huai-xuan,LIU Zhong-xin,LI Yan-qin,GUAN Bo-rui.Study on Matching of Electrode Insertion Depth and Spacing of Electrode of Rare Earth Electrolytic Cell with Numerical Simulation of Thermal-Electric Field Coupling[J].Nonferrous Metals (Extractive Metallurgy),2017(6):32-38.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号