###
有色金属(冶炼部分):2017,(6):20-23
本文二维码信息
码上扫一扫!
钛白酸解废渣中钛的浸出工艺研究
尹建平,何婷婷,唐明洁,粟海锋
(广西大学化学化工学院,广西大学化学化工学院,广西大学化学化工学院,广西大学化学化工学院)
Titanium Leaching from Waste Residues of Titanium White Acid Hydrolysis
YIN Jianping,HE Tingting,TANG Mingjie and SU Haifeng
(School of Chemistry and Chemical Engineering,Guangxi University,,,)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2317次   下载 1817次
投稿时间:2017-02-07     修订日期:2017-02-10     录用日期:2017-02-13     网络发布日期:2017-05-19
中文摘要: 采用加碱高温焙烧对硫酸法钛白粉产生的酸解渣进行预处理,再使用硫酸进行浸出。通过正交试验和单因素试验考察了反应时间、液固比、搅拌转速、硫酸浓度和浸出温度对钛浸出率的影响。结果表明,影响钛浸出率大小的因素依次为反应时间、液固比、搅拌转速、硫酸浓度、浸出温度。在反应时间60 min、液固比3、搅拌转速700 r/min、硫酸浓度11.0 mol/L、浸出温度95.0 ℃、酸解渣粒度-0.147 mm的条件下,钛浸出率达到90.35%。
中文关键词: 钛白  酸解废渣  浸出  钛
Abstract:Acid leaching residues from TiO2 production with sulfuric acid method were pretreated by roasting at high temperature with alkali and leached by sulfuric acid. Effects of leaching time, L/S, stirring speed, concentration of sulfuric acid, leaching temperature, and particle size on titanium leaching rate were investigated by orthogonal and single-factor experiments. The results show that influence on leaching rate of titanium is sequence as leaching time, L/S, stirring speed, concentration of sulfuric acid, and leaching temperature. Leaching rate of titanium is 90.35% under the optimum conditions including leaching time of 60 min, L/S=3, stirring speed of 700 r/min, concentration of sulfuric acid of 11 mol/L, leaching temperature of 95 ℃, and particle size of -0.147 mm.
文章编号:     中图分类号:X705    文献标志码:
基金项目:广西科技计划资助项目(桂科重1355002-4)
引用文本:
尹建平,何婷婷,唐明洁,粟海锋.钛白酸解废渣中钛的浸出工艺研究[J].有色金属(冶炼部分),2017(6):20-23.
YIN Jianping,HE Tingting,TANG Mingjie,SU Haifeng.Titanium Leaching from Waste Residues of Titanium White Acid Hydrolysis[J].Nonferrous Metals (Extractive Metallurgy),2017(6):20-23.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号