本文已被:浏览 2172次 下载 2417次
投稿时间:2016-11-24 修订日期:2016-12-01 录用日期:2016-12-02 网络发布日期:2017-02-21
投稿时间:2016-11-24 修订日期:2016-12-01 录用日期:2016-12-02 网络发布日期:2017-02-21
中文摘要: 通过从乌克兰引进的3150KWB BMO-01型电子束熔炼炉,使用工业纯海绵钛、Al-V中间合金和均匀铝豆经混料后压制成料块进行TC4钛合金熔炼试验,对铸锭进行检测分析、显微组织观察和力学性能测试。结果表明,通过合理的铝元素成分配比,熔炼出的TC4钛合金铸锭各元素含量符合国标要求。
Abstract:BECHM 3150KWB BMO-01 Electronic Beam Cooling Bed introduced from Ukraine was applied to smelt TC4 titanium alloy with pure industrial sponge titanium, Al-V intermediate alloy, and pressed aluminum particle. Ingot casting was analyzed, macro/micro structure was observed, mechanical properties of TC4 titanium alloy were measured. The results show that TC4 titanium alloy prepared by adjusting proper proportion of aluminum meets the requirement of national criterion.
文章编号: 中图分类号: 文献标志码:
基金项目:无
| 作者 | 单位 | |
| 李育贤* | 青海聚能钛业有限公司 | 1712348315@qq.com |
| 杨丽春 | 青海聚能钛业有限公司 |
| Author Name | Affiliation | |
| liyuxian | Qinghai fusion titanium Co., LTD | 1712348315@qq.com |
| YANG Li-chun |
引用文本:
李育贤,杨丽春.3150KWBMO-01型大功率电子束冷床炉熔炼TC4钛合金[J].有色金属(冶炼部分),2017(3):58-61.
liyuxian,YANG Li-chun.Smelting TC4 Titanium Alloy with EBCHM 3150KWB BMO-01 Electronic Beam Cooling Bed[J].Nonferrous Metals (Extractive Metallurgy),2017(3):58-61.
李育贤,杨丽春.3150KWBMO-01型大功率电子束冷床炉熔炼TC4钛合金[J].有色金属(冶炼部分),2017(3):58-61.
liyuxian,YANG Li-chun.Smelting TC4 Titanium Alloy with EBCHM 3150KWB BMO-01 Electronic Beam Cooling Bed[J].Nonferrous Metals (Extractive Metallurgy),2017(3):58-61.

关注微信公众号