本文已被:浏览 2318次 下载 2489次
投稿时间:2016-06-16 修订日期:2016-06-20 录用日期:2016-06-21 网络发布日期:2016-10-21
投稿时间:2016-06-16 修订日期:2016-06-20 录用日期:2016-06-21 网络发布日期:2016-10-21
中文摘要: 依据热量平衡原理,计算得到了某种气体喷吹流量下形成的“蘑菇头”直径为60.2 mm。使用商业软件FLUENT将“蘑菇头”区域设置为多孔介质,利用VOF模型模拟了“蘑菇头”存在时气泡的产生、生长、直至破裂的过程。对比没有“蘑菇头”时气泡的变化,模拟发现,“蘑菇头”的存在对流动过程的影响较大。“蘑菇头”的存在使气泡体积与表面积更大,形状更接近球形,且在炉内停留时间更长,有利于炉内气体与熔体的流动与充分反应。
Abstract:Calculated diameter of “head of mushroom” (HOM) is 60.2 mm with some rate of gas flowing based on thermal balance. Area of HOM was defined as porous media by commercial software FLUENT. Process of formation and growing up until burst of bubbles influenced by porous media was simulated by VOF model. Through comparision with condition without porous media, there is an obvious difference in flowing with existing of porous media according to simulation results. Existing of porous media results in bigger volume and surface area of bubble, sphere-like shape and longer maintance of bubble in furnace, which facilitate flowing and reaction of gas and molten liquid in furnace.
文章编号: 中图分类号: 文献标志码:
基金项目:国家自然科学基金资助项目(51276015)
| 作者 | 单位 | |
| 杨鹏 | 北京科技大学 能源与环境工程学院 | yangxiaome0303@163.com |
| 苏福永* | 北京科技大学 能源与环境工程学院 | sfyong@ustb.edu.cn |
| 刘训良 | 北京科技大学 能源与环境工程学院 | |
| 温治 | 北京科技大学 能源与环境工程学院 |
| Author Name | Affiliation | |
| YANG Peng | School of Mechanical Engineering,University of Science and Technology Beijing | yangxiaome0303@163.com |
| SU Fuyong | sfyong@ustb.edu.cn | |
| LIU Xun-liang | ||
| WEN Zhi |
引用文本:
杨鹏,苏福永,刘训良,温治.底吹炉喷枪出口处“蘑菇头”对气体行为影响的模拟研究[J].有色金属(冶炼部分),2016(11):1-4.
YANG Peng,SU Fuyong,LIU Xun-liang,WEN Zhi.Simulation of Gas Behavior Influenced by “Head of Mushroom” on Nozzle on Bottom-Blowing Furnace[J].Nonferrous Metals (Extractive Metallurgy),2016(11):1-4.
杨鹏,苏福永,刘训良,温治.底吹炉喷枪出口处“蘑菇头”对气体行为影响的模拟研究[J].有色金属(冶炼部分),2016(11):1-4.
YANG Peng,SU Fuyong,LIU Xun-liang,WEN Zhi.Simulation of Gas Behavior Influenced by “Head of Mushroom” on Nozzle on Bottom-Blowing Furnace[J].Nonferrous Metals (Extractive Metallurgy),2016(11):1-4.

关注微信公众号