###
有色金属(冶炼部分):2016,(3):6-9
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
含铜难处理金精矿铜回收试验及工程化应用
简椿林
(紫金矿业集团股份有限公司)
Experiment to Recover Copper from Copper Bearing Refractory Gold Concentrate and Engineering Application
JIAN Chun-lin
(Zijin Mining Group Co.Ltd,Shanghang,Fujian,364200)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2273次   下载 2055次
投稿时间:2015-10-06     修订日期:2015-10-13     录用日期:2015-10-14     网络发布日期:2016-02-23
中文摘要: 采用配料—焙烧—酸浸—氰化工艺从含铜难处理金精矿中综合回收有价金属,铜、金、银的浸出率分别为95.15%、98.18%、65.20%。在实验室研究基础上开发出的金精矿独特配料技术,使得铜浸出率大幅提高,工程化应用后综合经济效益明显提升。
中文关键词: 难处理金精矿  铜  焙烧  工程化应用
Abstract:Valuable metals were recovered from copper bearing refractory gold concentrate by processes of batching, roasting, acid leaching, and cyaniding. The leaching rate of copper, gold, and silver is 95.15%, 98.18%, and 65.20% respectively. The special batching technology of gold concentrate based on laboratory investigation significantly improves copper leaching rate and comprehensive economic benefits of valuable elements after engineering application.
文章编号:     中图分类号:    文献标志码:
基金项目:国家自然科学基金资助项目(51564021);福建省区域重大项目(2011H4025)
引用文本:
简椿林.含铜难处理金精矿铜回收试验及工程化应用[J].有色金属(冶炼部分),2016(3):6-9.
JIAN Chun-lin.Experiment to Recover Copper from Copper Bearing Refractory Gold Concentrate and Engineering Application[J].Nonferrous Metals (Extractive Metallurgy),2016(3):6-9.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号