###
有色金属(冶炼部分):2015,(7):24-26
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
某含铜物料综合回收镍铜工艺研究
卢苏君,杨粉娟,马天飞,欧晓健,张鹏,张素霞
(金川镍钴研究设计院;、甘肃省镍钴及稀贵金属综合利用重点实验室;、金川公司铜冶炼厂,金川镍钴研究设计院,金川镍钴研究设计院,金川镍钴研究设计院,金川镍钴研究设计院,金川集团公司)
Recovery of Nickel and Copper from Copper-bearing Smelting Slag
LU Sujun,Yang Fenjuan,Ma Tianfei,Ou Xiaojian,Zhang Penguin and Zhang Suxia
(Jinchuan Nickel Cobalt research engineering institute;、Key Laboratory of Nickel Cobalt and Precious Metals Comprehensive Utilization;、JinChuan Group GO, LTD Jinchuan Gansu China,,,,,)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2218次   下载 2549次
投稿时间:2015-01-20     修订日期:2015-01-23     录用日期:2015-01-27     网络发布日期:2015-06-23
中文摘要: 对某含铜物料进行常压通氧酸浸研究,考察液固比、加酸量、温度、浸出时间对含铜物料中镍、铜浸出率的影响。结果表明,在常压条件下通过酸浸能够将含铜物料中的铜浸出,镍部分浸出,在下述最佳浸出条件下,铜、镍、铁的浸出率分别为96.65%、7.63%、39.84%:液固比8︰1、温度85 ℃、加酸量120 g/L、时间6 h。
中文关键词: 含铜渣  常压浸出  硫酸  浸出率
Abstract:Atmospheric pressure leaching for copper-bearing smelting slag was studied. The effects of ratio of liquid to solid, acid dosage, temperature and reaction time on copper and nickel leaching rates were investigated. The results show that leaching ratio of copper, nickel and iron is 95.65%, 7.63%, and 39.84% respectively under the optimum conditions including ratio of liquid to solid of 8︰1, temperature of 85 ℃, acid dosage of 120 g/L, and reaction time of 6 h.
文章编号:     中图分类号:    文献标志码:
基金项目:甘肃省镍钴及稀贵金属综合利用重点实验室计划项目(2014-006)
引用文本:
卢苏君,杨粉娟,马天飞,欧晓健,张鹏,张素霞.某含铜物料综合回收镍铜工艺研究[J].有色金属(冶炼部分),2015(7):24-26.
LU Sujun,Yang Fenjuan,Ma Tianfei,Ou Xiaojian,Zhang Penguin,Zhang Suxia.Recovery of Nickel and Copper from Copper-bearing Smelting Slag[J].Nonferrous Metals (Extractive Metallurgy),2015(7):24-26.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号