###
有色金属(冶炼部分):2015,(6):34-37
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
硬脂酸钠改性制备防吸湿煅白
王国卫,李明照,梁晓波,梁一然,张耀斌,毛嘉,任川兮,冯小琴
(太原理工大学 材料科学与工程学院,太原理工大学 材料科学与工程学院,太原理工大学,太原理工大学 材料科学与工程学院,太原理工大学 材料科学与工程学院,太原理工大学 材料科学与工程学院,太原理工大学 材料科学与工程学院,北方自动控制技术研究所)
Preparation of Anti-moisture Calcined Dolomite Modified by Sodium Stearate
WANG Guo-wei,LI Ming-zhao,liangxiaobo,LIANG Yi-ran,ZHANG Yao-bin,MAO Jia,REN Chuan-xi and fengxiaoqin
(College of Materials Science and Engineering,Taiyuan University of Technology,,,,,,,)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2735次   下载 2837次
投稿时间:2015-01-05     修订日期:2015-01-08     录用日期:2015-01-09     网络发布日期:2015-05-20
中文摘要: 以硬脂酸钠为改性剂,用恒温快速搅拌装置对煅白表面进行改性处理,并对改性前后煅白的结构和表面性质进行表征。结果表明,在改性剂质量分数为5%,改性时间30 min,改性温度50~60 ℃时,煅白表面接触角约为128°,720 min时的吸湿率约为0.35%,而改性前相同时间内吸湿率约为1.89%。
中文关键词: 煅烧白云石  硬脂酸钠  改性  吸湿
Abstract:Surface of calcined dolomite was modified by sodium stearate in rapid mixing device at constant temperature. Structure and surface properties of calcined dolomite were characterized. The results show that surface contact angle of calcined dolomite is 128° and moisture absorption rate in 720 min drops from 1.89% to 0.35% under the optimum conditions including mass fraction of sodium stearate of 5%, modification time of 30 min, and modification temperature of 50~60 ℃.
文章编号:     中图分类号:    文献标志码:
基金项目:山西省国际科技合作项目(2014081001-2)
引用文本:
王国卫,李明照,梁晓波,梁一然,张耀斌,毛嘉,任川兮,冯小琴.硬脂酸钠改性制备防吸湿煅白[J].有色金属(冶炼部分),2015(6):34-37.
WANG Guo-wei,LI Ming-zhao,liangxiaobo,LIANG Yi-ran,ZHANG Yao-bin,MAO Jia,REN Chuan-xi,fengxiaoqin.Preparation of Anti-moisture Calcined Dolomite Modified by Sodium Stearate[J].Nonferrous Metals (Extractive Metallurgy),2015(6):34-37.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号