###
有色金属(冶炼部分):2015,(4):47-49
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
偏重亚硫酸钠-空气法处理氰化尾渣
王为振,孙聪,常耀超,李云,孙留根
(北京矿冶研究总院,北京矿冶研究总院,北京矿冶研究总院,北京矿冶研究总院,北京矿冶研究)
Treating Cyanide Residue by Na2S2O5/Air Process
Wang Wei-zhen,Sun Cong,Chang Yao-chao,Li Yun and Sun liu-gen
(Beijing General Research Institute of Mining & Metallurgy,,,,)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2362次   下载 2172次
投稿时间:2014-11-18     修订日期:2014-11-19     录用日期:2014-11-20     网络发布日期:2015-03-23
中文摘要: 采用偏重亚硫酸钠—空气法处理氰化尾渣进行脱氰的研究,考察了Na2S2O5浓度、Cu2+浓度、空气速率、初始pH和反应时间对脱氰效果的影响。结果表明,在Na2S2O5浓度0.2 g/L、Cu2+浓度80 mg/L、空气鼓入速率250 mL/min、初始pH≈10的条件下反应2 h,氰化尾渣矿浆中全氰浓度从91.5 mg/L降到0.2 mg/L左右,可以满足GB8978-1996污水综合排放标准。
Abstract:Cyanide residue was treated by Na2S2O5/Air Process to reduce cyanide. The effects of Na2S2O5 concentration, Cu2 concentration, air blowing rate, initial pH value, and action time on decyanation were studied. The results show that the optimum conditions include Na2S2O5 concentration of 0.2 g/L, Cu2 concentration of 80 mg/L, air blowing rate of 250 mL/min, initial pH value of 10 and reaction time of 2 h. Under the optimum conditions, the concentration of total cyanogen in cyanide residue drops from 91.5 mg/L to 0.2 mg/L, which meets the requirement of integrated wastewater discharge standard of GB8978-1996.
文章编号:     中图分类号:    文献标志码:
基金项目:国家重大科学仪器设备开发专项(2012YQ22011905)
引用文本:
王为振,孙聪,常耀超,李云,孙留根.偏重亚硫酸钠-空气法处理氰化尾渣[J].有色金属(冶炼部分),2015(4):47-49.
Wang Wei-zhen,Sun Cong,Chang Yao-chao,Li Yun,Sun liu-gen.Treating Cyanide Residue by Na2S2O5/Air Process[J].Nonferrous Metals (Extractive Metallurgy),2015(4):47-49.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号