###
有色金属(冶炼部分):2015,(2):53-57
本文二维码信息
码上扫一扫!
电沉积制备Ni-Co-Al2O3纳米复合镀层的研究
王一雍,苏建铭,韩楚菲,金辉,张峻巍,宋华,李继东
(辽宁科技大学激光先进制造技术研发中心,辽宁科技大学激光先进制造技术研发中心,辽宁科技大学激光先进制造技术研发中心,辽宁科技大学激光先进制造技术研发中心,辽宁科技大学激光先进制造技术研发中心,辽宁科技大学,辽宁科技大学)
Study of Preparation of Ni-Co-Al2O3 Nanocomposite Coating by Electro-deposition
Wang Yiyong,Su Jianming,Han Chufei,Jin Hui,Zhang Junwei,Song Hua and Li Jidong
(Laser Advanced Manufacturing Technology Center,,,,,,)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2743次   下载 2788次
投稿时间:2014-08-20     修订日期:2014-08-28     录用日期:2014-08-29     网络发布日期:2015-01-23
中文摘要: 采用电沉积工艺制备了Ni-Co-Al2O3纳米复合镀层,利用显微硬度仪测定了复合镀层的硬度,考察了电流密度、纳米Al2O3浓度、电镀温度及镀液pH对镀层硬度的影响,分别借助SEM分析技术及电化学测试技术对最大硬度镀层进行微观性能及耐蚀性能进行研究。结果表明,纳米Al2O3弥散分布在镀层中,复合镀层晶粒进一步细化,耐蚀性显著提高。
Abstract:Ni-Co-Al2O3 nanocomposite coating was prepared by electro-deposition. The hardness was determined by micro-hardness tester. The effects of current density, concentration of nano-Al2O3 particle, and temperature and pH value of plating solution on hardness of coating were investigated. The microstructure and corrosion resistance of the coating with the highest hardness value were investigated by SEM and electrochemical testing. The results indicate that nano-Al2O3 particles distribute in coating, grain of composite coating is further refined and performance of corrosion resistance is obviously improved.
文章编号:     中图分类号:TF 803 . 21    文献标志码:
基金项目:鞍山市百千万科技创新工程项目(2012S05);鞍山市科技计划项目(2012S08)
引用文本:
王一雍,苏建铭,韩楚菲,金辉,张峻巍,宋华,李继东.电沉积制备Ni-Co-Al2O3纳米复合镀层的研究[J].有色金属(冶炼部分),2015(2):53-57.
Wang Yiyong,Su Jianming,Han Chufei,Jin Hui,Zhang Junwei,Song Hua,Li Jidong.Study of Preparation of Ni-Co-Al2O3 Nanocomposite Coating by Electro-deposition[J].Nonferrous Metals (Extractive Metallurgy),2015(2):53-57.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号