###
有色金属(冶炼部分):2015,(1):30-33
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
还原剂对海绵钛品级率的影响分析
李亮
(攀钢集团研究院有限公司)
Analysis of Reductant on Grade of Titanium Sponge
liliang
(Pangang Group Research Institute Co. , Ltd.)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2714次   下载 2473次
投稿时间:2014-08-18     修订日期:2014-08-21     录用日期:2014-08-22     网络发布日期:2014-12-24
中文摘要: 对镁热法生产海绵钛还原过程加镁量、加镁方式、还原副产物排放等对海绵钛质量的影响进行分析。结果表明,海绵钛等级随还原剂镁中杂质元素含量的增多而降低,稳定控制还原过程加镁量可稳定反应的液位并提高0A级海绵钛的比例;0A级海绵钛炉次冷凝镁脱气耗时比≤1级品炉次平均少1 h。熔镁与加镁耗时对产品品级率影响不明显,还原过程副产物氯化镁的顺利排放能提高海绵钛的等级率。
中文关键词: 海绵钛  还原剂镁  品级率
Abstract:The effects of magnesium dosage, feeding mode of magnesium, and discharge of reduction by-product in magnesium reduction process on quality of titanium sponge were analyzed. The results show that grade of titanium sponge drops with increase of impurity elements in magnesium. Stable control of feeding amount of magnesium can stabilize liquid level of reaction and improve proportion of 0A grade titanium sponge. Condensed magnesium degassing time of 0A grade titanium sponge is one hour shorter than that of ≤1 grade titanium sponge. Time-consuming of magnesium adding and molten has little effect on grade. Smooth discharge of by-product of magnesium chloride can improve grade of titanium sponge.
文章编号:     中图分类号:    文献标志码:
基金项目:国家重点基础研究发展计划(973计划)项目(2013CB632606)
引用文本:
李亮.还原剂对海绵钛品级率的影响分析[J].有色金属(冶炼部分),2015(1):30-33.
liliang.Analysis of Reductant on Grade of Titanium Sponge[J].Nonferrous Metals (Extractive Metallurgy),2015(1):30-33.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号