本文已被:浏览 2628次 下载 2440次
投稿时间:2014-07-29 修订日期:2014-07-31 录用日期:2014-08-01 网络发布日期:2014-11-19
投稿时间:2014-07-29 修订日期:2014-07-31 录用日期:2014-08-01 网络发布日期:2014-11-19
中文摘要: 采用重金属的潜在生态危害和毒理学毒性系数对某铅锌冶炼厂产生废气节点的危害性综合指数进行分析,确定主要废气节点的危害性顺序,为各个产生废气节点分级管理控制提供依据。结果表明,产生废气节点潜在生态危害性综合指数和毒理学危害性综合指数的最大值分别为0.253 9和0.300 1,最小值均为0.001 8。危害性最高的节点为熔铅布袋,该节点为关键污染物控制节点,在生产过程中需要重点管理。
Abstract:Potential hazardous coefficients heavy metal and toxicology coefficients were applied to analyze hazards of pollutants emissions node from one lead and zinc smelter. The order of hazards was confirmed and the hierarchical management control for each emissions node was provided. The result show that the maximum potential hazardous coefficients of heavy metal and toxicology coefficients are 0.253 9 and 0.300 1 respectively, the minimum are both 0.001 8. As the primary node in terms of risk, molten lead bag plays a key role in pollutants control and calls for attention in management.
keywords: lead zinc smelting emissions node hazard
文章编号: 中图分类号:X506 文献标志码:
基金项目:“十二五”国家科技支撑计划项目(2012BAC12B00)
| 作者 | 单位 | |
| 屈小梭* | 中华环保联合会环保技术标准研究专业委员会 | xsqu2009@163.com |
| 梁兴印 | 中华环保联合会环保技术标准研究专业委员会 | |
| 秦飞 | 中华环保联合会环保技术标准研究专业委员会 | |
| 王亚军 | 中华环保联合会环保技术标准研究专业委员会 |
引用文本:
屈小梭,梁兴印,秦飞,王亚军.铅锌冶炼过程产生废气节点危害性分析[J].有色金属(冶炼部分),2014(12):45-49.
quxiaosuo,liangxingxin,qinfei,qinfei.Hazard Analysis of Emissions Node from Lead and Zinc Smelting Process[J].Nonferrous Metals (Extractive Metallurgy),2014(12):45-49.
屈小梭,梁兴印,秦飞,王亚军.铅锌冶炼过程产生废气节点危害性分析[J].有色金属(冶炼部分),2014(12):45-49.
quxiaosuo,liangxingxin,qinfei,qinfei.Hazard Analysis of Emissions Node from Lead and Zinc Smelting Process[J].Nonferrous Metals (Extractive Metallurgy),2014(12):45-49.

关注微信公众号