###
有色金属(冶炼部分):2014,(10):15-19
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
白银熔池富氧炼铜技术研究
余旦新
(白银有色集团股份有限公司 甘肃 730900)
Study on Oxygen-enriched Copper Smelting Technology in Baiyin Bath
yudanxin
(Copper Co.,Ltd of Baiyin Nonferrous Metals Group Co.)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2442次   下载 2646次
投稿时间:2014-06-10     修订日期:2014-06-19     录用日期:2014-06-19     网络发布日期:2014-09-19
中文摘要: 对“白银炼铜法”的空气熔炼、富氧熔炼和富氧自热熔炼三个发展阶段从理论上进行了分析。结果表明,当鼓风强度一定时,随着使用氧气量的增加,鼓风富氧浓度的升高,床能力升高,熔炼自热程度升高;熔炼床能力随熔池鼓风强度和热强度升高而升高;氧料比随冰铜品位的升高而上升;富氧自热熔炼的节能效果最好。“白银炼铜法”的各项工艺指标均达到当今国际炼铜技术先进水平。
中文关键词: 白银炼铜法  富氧熔炼  自热熔炼  能耗  指标
Abstract:Three development stages of “Baiyin Copper Smelting” (BCS), i.e., air-smelting, oxygen-enriched smelting, and oxygen-enriched autogenous smelting, were theoretically analyzed .The results show that smelting bed capacity and self-heating degree of smelting rise with increase of oxygen dosage and oxygen enriched concentration under certain blowing strength. Smelting bed capacity rises with increase of blowing strength and heat strength in melting bath. Ratio of oxygen to material rises with increase of matte grade. Oxygen-enriched autogenous smelting has the best energy saving effect. All technical indexes of BCS reach the international advanced level.
文章编号:     中图分类号:    文献标志码:
基金项目:无
引用文本:
余旦新.白银熔池富氧炼铜技术研究[J].有色金属(冶炼部分),2014(10):15-19.
yudanxin.Study on Oxygen-enriched Copper Smelting Technology in Baiyin Bath[J].Nonferrous Metals (Extractive Metallurgy),2014(10):15-19.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号