###
有色金属(冶炼部分):2014,(9):23-25
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
CVD法制备高纯钛的工艺优化
王睿,陈肖虎,李纪伟,袁继维
(贵州大学材料与冶金学院,贵州大学材料与冶金学院,贵州大学材料与冶金学院,遵义钛业股份有限公司)
Process Optimization for Titanium Purification by Chemical Vapor Deposition
Wang-Rui,Chen Xiao-hu,Li-Jiwei and Yuan Ju-wei
(College of Materials and Metallurgy,Guizhou University,,,)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2696次   下载 3411次
投稿时间:2014-04-14     修订日期:2014-04-17     录用日期:2014-04-18     网络发布日期:2014-08-21
中文摘要: 采用正交试验研究了钛卤盐热裂解法生产高纯钛的工艺条件。结果表明,各因素对产率的影响程度依次为低温区(卤化源区)温度>基底截面直径>卤化剂用量>高温区(热裂解区)温度。优化后的工艺参数为:卤化剂用量600 g左右、基底截面直径6 mm、低温区和高温区温度分别控制在200~700 ℃和1 100~1 300 ℃。在最优条件下获得的产品经电子束熔炼后,纯度可以达到99.998%。
中文关键词: CVD  卤化法  高纯钛  正交试验
Abstract:The optimal process conditions of titanium purification by thermal decomposition of titanium iodides were studied by orthogonal experiment. The results show that the effecting sequence on productivity of high purity titanium presents as temperature of halogenation area, diameter of base section, dosage of halogenating agent, and temperature of thermal decomposition area. The optimum conditions include dosage of halogenating agent of 600 g, diameter of base section of 6 mm, temperature of halogenation area of 200~700 ℃ and thermal decomposition area of 1 100~1 300 ℃. Obtained under optimum conditions remelted with electron beam (EB), purity of products can reach 99.998%.
文章编号:     中图分类号:TF823    文献标志码:
基金项目:“十一五”国家科技支撑计划项目(2008BAE62B02)
引用文本:
王睿,唐晓宁,陈肖虎,李纪伟,李名新.CVD法制备高纯钛的工艺优化[J].有色金属(冶炼部分),2014(9):23-25.
Wang-Rui,TANG Xiao-ning,Chen Xiao-hu,Li-Jiwei,LI Ming-xin.Process Optimization for Titanium Purification by Chemical Vapor Deposition[J].Nonferrous Metals (Extractive Metallurgy),2014(9):23-25.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号