本文已被:浏览 2938次 下载 3136次
投稿时间:2014-01-09 修订日期:2014-01-12 录用日期:2014-01-13 网络发布日期:2014-06-23
投稿时间:2014-01-09 修订日期:2014-01-12 录用日期:2014-01-13 网络发布日期:2014-06-23
中文摘要: 以高砷锌烟灰硫酸化焙烧得到的焙砂为原料,考察浸出方式、温度、硫酸浓度、液固比对焙砂中铟、锗、锌浸出的影响。结果表明,焙砂中的锌在水浸时几乎全部浸出,但铟和锗的浸出需要较高的温度和酸度。铟、锗浸出的最佳条件为:温度95 ℃,硫酸浓度150 g/L,液固比对浸出基本没有影响。在此条件下,铟、锗、锌的浸出率分别在95%、75%、98%以上。
Abstract:Generated from arsenic rich zinc dust by sulfation roasting process, calcine was applied as raw material to investigate effects of leaching methods, temperature, H2SO4 concentration and ratio of liquid to solid (L/S) on leaching of indium, germanium and zinc, respectively. The results show that most of zinc in calcining can be leached with water, but higher temperature and H2SO4 concentration are in need to leach indium and germanium. The optimum leaching conditions for indium and germanium include temperature of 95 ℃ and H2SO4 concentration of 150 g/L, with no effect of L/S on leaching. Under these conditions, leaching rate of indium, germanium and zinc are >95%, >75%, and >98%, respectively.
文章编号: 中图分类号: 文献标志码:
基金项目:云南铜业(集团)有限公司院士工作站资助项目
| 作者 | 单位 | |
| 杨永强* | 北京矿冶研究总院 | xiaoqiang0207@163.com |
| 王成彦 | 北京矿冶研究总院 | chywang@yeah.net |
| 杨玮娇 | 北京矿冶研究总院 | weijiao1110@163.com |
| 袁文辉 | 北京矿冶研究总院 | ywh1113@163.com |
| 邢鹏 | 北京矿冶研究总院 | xing0135@sina.com |
引用文本:
杨永强,王成彦,杨玮娇,袁文辉,邢鹏.锌烟灰焙砂浸出铟、锗、锌的研究[J].有色金属(冶炼部分),2014(7):11-13.
YANG Yong-qiang,WANG Cheng-yan,YANG Wei-jiao,YUAN Wen-hui,XING Peng.Study of Leaching of Indium, Germanium and Zinc from Zinc Calcining[J].Nonferrous Metals (Extractive Metallurgy),2014(7):11-13.
杨永强,王成彦,杨玮娇,袁文辉,邢鹏.锌烟灰焙砂浸出铟、锗、锌的研究[J].有色金属(冶炼部分),2014(7):11-13.
YANG Yong-qiang,WANG Cheng-yan,YANG Wei-jiao,YUAN Wen-hui,XING Peng.Study of Leaching of Indium, Germanium and Zinc from Zinc Calcining[J].Nonferrous Metals (Extractive Metallurgy),2014(7):11-13.

关注微信公众号