###
有色金属(冶炼部分):2013,(10):48-50
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
离心加速度对自蔓延离心法制备WCx/Fe金属陶瓷组织的影响
张育潜,高峰
(西北工业大学材料学院,北京矿冶研究总院)
Effect of Centrifugal Acceleration on Microstructure of WCx/Fe Cermet Prepared by SHS- Centrifugal Process
Zhang Yuqian[sub_s][sub_e] and Gao Feng[sub_s]
(Northwestern Polytechnical University,)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2626次   下载 3172次
投稿时间:2013-06-28     修订日期:2013-07-01     录用日期:2013-07-01     网络发布日期:2013-09-29
中文摘要: 采用自蔓延离心法制备WCx/Fe金属陶瓷内衬钢管,研究离心加速度对金属陶瓷组织的影响。结果表明,当离心加速度为50g时,涂层中存在氧化铝陶瓷相,随着离心加速度的增加,涂层组织由树枝晶向等轴晶转变。当离心加速度为200g时,涂层中的硬质相呈梯度分布。
Abstract:WCx/Fe wear-resistant lined composite pipes were prepared by SHS-Centrifugation. Effect of centrifugal acceleration on the cermet microstructure was studied. The results show that alumina ceramics stay in ceramic layer when the centrifugal acceleration is 50g. Cermet microstructure transforms from dendrite to equiaxed grain with the rise of centrifugal acceleration. With the centrifugal acceleration of 200g, hard phase presents gradient distribution in coating.
文章编号:     中图分类号:    文献标志码:
基金项目:国家自然科学基金资助项目(51101017)
引用文本:
张育潜,高峰.离心加速度对自蔓延离心法制备WCx/Fe金属陶瓷组织的影响[J].有色金属(冶炼部分),2013(10):48-50.
Zhang Yuqian[sub_s][sub_e],Gao Feng[sub_s].Effect of Centrifugal Acceleration on Microstructure of WCx/Fe Cermet Prepared by SHS- Centrifugal Process[J].Nonferrous Metals (Extractive Metallurgy),2013(10):48-50.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号