###
有色金属(冶炼部分):2013,(9):60-62
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
Zr55Al10Ni5Cu30非晶态合金的制备与性能研究
何庆坤,刘俊成,王进,刘安法
(山东理工大学材料科学与工程学院,山东理工大学材料科学与工程学院,山东理工大学材料科学与工程学院,山东理工大学材料科学与工程学院)
Preparation and Properties of Zr55Al10Ni5Cu30 Amorphous Alloy
HE Qingkun,LIU Juncheng,WANG Jin and LIU Anfa
(School of Material Science and Technology,Shandong University of Technology,,,)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2521次   下载 3329次
投稿时间:2013-03-05     修订日期:2013-03-05     录用日期:2013-03-11     网络发布日期:2013-08-22
中文摘要: 采用石墨坩埚浇铸法在真空中频感应熔炼炉中制备Zr55Al10Ni5Cu30合金,并对合金进行了金相、X射线衍射和显微硬度的测试,考察原料纯度、过热度及冷却速率对非晶态合金性能的影响。结果表明,采用工业级原料就可以制备出性能良好的非晶态合金,在低的冷却速率下形成的非晶态合金具有相对较高的硬度,适当提高过热度可以减少微晶的形成。
Abstract:Zr55Al10Ni5Cu30 alloy was prepared in vacuum medium-frequency induction furnace by graphite crucible casting method with industrial purity raw materials. The alloys were tested by metallography, XRD and micro-hardness testing. The effects of purity of raw materials, degree of superheat and cooling rate on properties of amorphous alloy were investigated. The results show that Zr55Al10Ni5Cu30 amorphous alloy with good performance is prepared with industrial grade materials. Zr55Al10Ni5Cu30 alloys taking into form with low cooling rate have relatively high hardness. Appropriate increase of degree of superheat can reduce formation of crystallites.
文章编号:     中图分类号:    文献标志码:
基金项目:山东省科技发展计划项目(2009GG10003038)
引用文本:
何庆坤,刘俊成,王进,刘安法.Zr55Al10Ni5Cu30非晶态合金的制备与性能研究[J].有色金属(冶炼部分),2013(9):60-62.
HE Qingkun,LIU Juncheng,WANG Jin,LIU Anfa.Preparation and Properties of Zr55Al10Ni5Cu30 Amorphous Alloy[J].Nonferrous Metals (Extractive Metallurgy),2013(9):60-62.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号