###
有色金属(冶炼部分):2013,(7):17-18
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
常压硫酸焙烧法提取镍磷铁中的镍
周骏宏,韦灏,陆大面,尤彩霞
(黔南民族师范学院化学与化工系 贵州 都匀 河北化工医药职业技术学校 河北省石家庄市方兴路号,黔南民族师范学院化学与化工系,黔南民族师范学院化学与化工系,河北化工医药职业技术学校)
Nickel Extraction from Nickel Ferrophosphorus with Atmospheric Pressure Sulfating Roasting and Water Leaching Process
Zhoujunhong,Wei Hao,Lu damian and Youcaixia
(southern guizhou national normal college chemistry and Chinese,,,)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2318次   下载 1952次
投稿时间:2012-12-18     修订日期:2012-12-20     录用日期:2012-12-21     网络发布日期:2013-06-19
中文摘要: 采用硫酸化焙烧再水浸的方法从钙镁磷肥的副产物镍磷铁中提取镍,重点研究了提镍过程中相关因素对镍浸出率的影响。结果表明,在酸料比0.5、焙烧温度300 ℃、焙烧时间3 h、水浸液固比7∶1、水浸温度70 ℃、水浸时间2.5 h的条件下,浸出效果最好,浸出液中镍浸出率达到73.43%。
中文关键词: 镍磷铁  硫酸化焙烧  镍  浸出
Abstract:Nickel was extracted from nickel ferrophosphorus, by-product of calcium-magnesium phosphate (fertilizer), with atmospheric pressure sulfating roasting and water leaching process. The effects of technical parameters on nickel leaching rate were emphatically investigated. The results show that the nickel extraction rate is 73.43% under the optimum conditions including ratio of acid to material of 0.5, roasting temperature of 300 ℃, roasting time of 3 h, ratio of solid to liquid of 7∶1, leaching temperature of 70 ℃, and leaching time of 2.5 h.
文章编号:     中图分类号:    文献标志码:
基金项目:贵州省教育厅自然科学研究项目(20090049)
引用文本:
周骏宏,韦灏,陆大面,尤彩霞.常压硫酸焙烧法提取镍磷铁中的镍[J].有色金属(冶炼部分),2013(7):17-18.
Zhoujunhong,Wei Hao,Lu damian,Youcaixia.Nickel Extraction from Nickel Ferrophosphorus with Atmospheric Pressure Sulfating Roasting and Water Leaching Process[J].Nonferrous Metals (Extractive Metallurgy),2013(7):17-18.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号