###
有色金属(冶炼部分):2013,(5):17-19
本文二维码信息
码上扫一扫!
Co(Ⅲ)-Na2SO3-H2SO4体系浸出钴的研究
卢苏君,王书友,诸葛福瑜,张晗,张鹏
(金川镍钴研究设计院,金川镍钴研究设计院,金川镍钴研究设计院,金川镍钴研究设计院,金川镍钴研究设计院)
Study on Cobalt Leaching in Co (Ⅲ)-Na2SO3-H2SO4 System
LU Sujun,WANG Shuyou,ZHUGE Fuyu,ZHANG Han and ZHANG Peng
(Jinchuan Nickel Cobalt research engineering institute Jinchuan Gansu China,,,,)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2924次   下载 2855次
投稿时间:2012-09-24     修订日期:2012-09-26     录用日期:2012-09-28     网络发布日期:2013-04-23
中文摘要: 在硫酸体系下对某含钴原料进行了还原浸出研究。考察硫酸用量、亚硫酸钠用量、浸出温度、聚丙烯酰胺用量对钴浸出率及过滤性能的影响。结果表明,对1 kg钴原料,在液固比5∶1、浸出温度60 ℃、浓硫酸400 mL、亚硫酸钠用量360 g、浸出终点pH 1.0~1.5的条件下,钴浸出率达到97%以上。加入20~40 mL聚丙烯酰胺可以改善浸出液的过滤性能。
中文关键词: 钴  浓硫酸  浸出率  过滤性能  聚丙烯酰胺
Abstract:Cobalt-bearing raw materials were reduction leached in sulfuric acid system. The effects of dosage of sulfuric acid and sodium sulfite, leaching temperature, dosage of polyacrylamide on leaching rate of cobalt and the filtering performance were investigated. The results show that the leaching rate of cobalt is above 97% and the filtering performance is favorable under the optimum conditions including (for 1 kg raw materials) ratio of liquid to solid of 5∶1, leaching temperature of 60 ℃, dosage of concentrated sulfuric acid of 400 mL, dosage of sodium sulfite of 360 g, dosage of polyacrylamide of 20~40 mL, and pH value of terminal of 1.0~1.5.
文章编号:     中图分类号:    文献标志码:
基金项目:
引用文本:
卢苏君,王书友,诸葛福瑜,张晗,张鹏.Co(Ⅲ)-Na2SO3-H2SO4体系浸出钴的研究[J].有色金属(冶炼部分),2013(5):17-19.
LU Sujun,WANG Shuyou,ZHUGE Fuyu,ZHANG Han,ZHANG Peng.Study on Cobalt Leaching in Co (Ⅲ)-Na2SO3-H2SO4 System[J].Nonferrous Metals (Extractive Metallurgy),2013(5):17-19.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号