本文已被:浏览 2765次 下载 2103次
投稿时间:2012-08-17 修订日期:2012-08-23 录用日期:2012-08-24 网络发布日期:2013-02-19
投稿时间:2012-08-17 修订日期:2012-08-23 录用日期:2012-08-24 网络发布日期:2013-02-19
中文摘要: 某锌冶炼企业采用传统的“焙烧—浸出—电解”工艺路线,其铟萃余液含锌高达45 g/L,回收这些锌的技术难点是有效去除溶液中的有机物。设置油水预分离和浮物预脱除工艺后,在流量20 L/min和萃余液温度40 ℃的条件下,除油率在85%以上。
Abstract:The conventional process of roasting-leaching-electrolysis was applied by a zinc smelter and the zinc concentration in zinc raffinate was up to 45 g/L. The technical difficulty to recover zinc was how to remove the organic matte in solution. The removal rate of oil is above 85% under the following conditions including flow rate of raffinate of 20 L/min, temperature of 40 ℃, with application of pre-separation of oil-water and pre-removal of floats.
keywords: extraction resins agglomeration oil removing
文章编号: 中图分类号: 文献标志码:
基金项目:广西自然科学基金资助项目(2010GXNSFA013034);广西教育厅广西高等学校特色专业及课程一体化建设项目(GXTSZY058)
| 作者 | 单位 | |
| 李旭光 | 桂林理工大学南宁校区 | lixuguangw@yahoo.com.cn |
| 唐罡 | 锌分厂 | 87607086@qq.com |
| 梁铎强* | 广西大学资源与冶金学院 | liangduoqiang@yahoo.com.cn |
| 刘平 | 桂林理工大学 |
引用文本:
李旭光,唐罡,梁铎强,刘平.铟萃余液树酯凝聚法除油试验[J].有色金属(冶炼部分),2013(3):41-43.
LiXu-guang,Tang-Gang,liangDuo-qiang,LIU Ping.Oil Removal from Indium Raffinate with Resins Agglomeration Process[J].Nonferrous Metals (Extractive Metallurgy),2013(3):41-43.
李旭光,唐罡,梁铎强,刘平.铟萃余液树酯凝聚法除油试验[J].有色金属(冶炼部分),2013(3):41-43.
LiXu-guang,Tang-Gang,liangDuo-qiang,LIU Ping.Oil Removal from Indium Raffinate with Resins Agglomeration Process[J].Nonferrous Metals (Extractive Metallurgy),2013(3):41-43.

关注微信公众号