###
有色金属(冶炼部分):2012,(10):27-29
本文二维码信息
码上扫一扫!
从高压碱浸液中提取钼钨新工艺
曹耀华,刘红召,高照国,杨绍文
(中国地质科学院郑州矿产综合利用研究所,中国地质科学院郑州矿产综合利用研究所,中国地质科学院郑州矿产综合利用研究所,中国地质科学院郑州矿产综合利用研究所)
New Process for Molybdenum and Tungsten Extraction from High Pressure Alkaline Leaching Solution
caoyaohua,liuhongzhao,gaozhaoguo and yangshaowen
(Zhengzhou Institute of Multipurpose Utilization of Mineral Resources, CAGS, Zhengzhou,,,)
摘要
图/表
参考文献
相似文献
本文已被:浏览 3110次   下载 3232次
投稿时间:2012-03-09     修订日期:2012-03-09     录用日期:2012-05-03     网络发布日期:2012-09-19
中文摘要: 针对某氧化钼钨粗精矿高压碱浸后得到的浸出液钼钨含量均较高、钼钨分离困难的特点,确定了钼钨浸出液镁盐净化除杂、钼钨共沉淀、干燥、钼钨酸铵制备的工艺流程,主要考察了氯化铵用量、沉淀时间、pH、温度、溶液浓度对钼沉淀率的影响。结果表明,最终获得的产品含Mo 47.57%、WO3 10.13%,杂质磷、砷分别为0.0027%、0.041%,产品符合生产钨钼合金的要求。
中文关键词: 高压浸出液  钼  钨  钼钨酸铵
Abstract:According to the characteristics of high tungsten and molybdenum content in the high pressure leaching solution of tungsten and molybdenum oxide rough concentrate, a new process for molybdenum-tungsten extraction was adopted including purification with magnesium salt, molybdenum-tungsten co-precipitation, drying, preparation of ammonium molybdate-tungstate. The effects of ammonium chloride dosage, precipitation time, pH, temperature, and solution concentration on molybdenum precipitation rate were investigated. The results show that the final products, i.e., ammonium molybdate-tungstate, contain 47.57% Mo and 10.13% WO3, respectively, and the impurities of phosphorus and arsenic are 0.0027% and 0.041%, respectively. This product meets requirement of molybdenum-tungsten alloy production.
文章编号:     中图分类号:    文献标志码:
基金项目:
引用文本:
曹耀华,刘红召,高照国,杨绍文.从高压碱浸液中提取钼钨新工艺[J].有色金属(冶炼部分),2012(10):27-29.
caoyaohua,liuhongzhao,gaozhaoguo,yangshaowen.New Process for Molybdenum and Tungsten Extraction from High Pressure Alkaline Leaching Solution[J].Nonferrous Metals (Extractive Metallurgy),2012(10):27-29.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号