本文已被:浏览 3432次 下载 36次
投稿时间:2011-05-19 网络发布日期:2011-12-06
投稿时间:2011-05-19 网络发布日期:2011-12-06
中文摘要: 利用碳酸氢铵做沉淀剂制备氧化铈抛光粉,通过L16(44)正交试验,研究了温度、硝酸铈浓度、滴加速度和搅拌速度对氧化铈粒度和比表面积的影响。最佳粒度制备工艺条件:60 ℃、硝酸铈浓度50 g/L、搅拌速率500 r/min、滴加速度50 mL/min。并对最佳制备工艺条件下制取的抛光粉进行粒度、形貌和抛蚀量进行研究。
Abstract:The preparation process of cerium oxide polishing powder was studied by ammonium bicarbonate precipitation. The effects of precipitation temperature, cerium nitrate concentration, feeding speed and stirring speed on particle size and specific surface area of CeO2 polishing powder were investigated by means of L16(44) orthogonal test. The optimum preparation conditions included temperature of 60 ℃, cerium nitrate concentration of 50 g/L, stirring speed of 500 r/min, and feeding speed of 50 mL/min. The particle size, morphology and burnishing mass of CeO2 prepared under the above optimum conditions were studied.
文章编号: 中图分类号: 文献标志码:
基金项目:国家杰出青年基金项目(51045216);内蒙古自治区自然科学基金项目(2010MS0710)
引用文本:
尹雪岭,李梅,柳召刚,胡艳宏.碳酸氢铵沉淀法制备氧化铈抛光粉[J].有色金属(冶炼部分),2011(12):43-45.
YIN Xue-ling, LI Mei, LIU Zhao-gang, HU Yan-hong.Synthesis of Cerium Oxide Polishing Powder by Ammonium Bicarbonate Precipitation[J].Nonferrous Metals (Extractive Metallurgy),2011(12):43-45.
尹雪岭,李梅,柳召刚,胡艳宏.碳酸氢铵沉淀法制备氧化铈抛光粉[J].有色金属(冶炼部分),2011(12):43-45.
YIN Xue-ling, LI Mei, LIU Zhao-gang, HU Yan-hong.Synthesis of Cerium Oxide Polishing Powder by Ammonium Bicarbonate Precipitation[J].Nonferrous Metals (Extractive Metallurgy),2011(12):43-45.

关注微信公众号