###
有色金属(冶炼部分):2011,(12):18-21
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
铝电解槽烟气预热阳极炭块的探索研究
(1.长沙有色冶金设计研究院,长沙 410083;2.中南大学 冶金科学与工程学院,长沙 410083)
Research on Preheating Carbon Anode by Flue Gas in Aluminum Reduction Cell
(1. Changsha Engineering and Research Institute of Nonferrous Metallurgy, Changsha 410011, China;2. School of Metallurgical Science and Engineering, Central South University, Changsha 410083, China)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2955次   下载 35次
投稿时间:2011-04-18               网络发布日期:2011-12-06
中文摘要: 对铝电解槽烟气预热阳极炭块进行研究,提出了一种烟气余热回收的思路并设计相应的工艺流程。应用热传递原理,建立余热回收热交换的数学模型,以此对余热回收的效率进行计算。结果表明,余热回收效率较低,要完全达到回收阳极余热的要求,尚需要加入外部的热源。
中文关键词: 铝电解  烟气  余热回收  预焙炭阳极
Abstract:The research of preheating carbon anode by flue gas in aluminum reduction cell was carried out. A heat recovery method and the corresponding technology were proposed. With the application of the heat transferring theory, the heat exchanging model was also built and the heat recovery rate was calculated. The results indicate that the heat recovery rate was relatively low. Therefore, the external heat source is necessary in order to recover the heat from flue gas.
文章编号:     中图分类号:    文献标志码:
基金项目:国家科技支撑计划项目(2009BAE85B02)
引用文本:
罗宗山1,张红亮2,张翮辉2.铝电解槽烟气预热阳极炭块的探索研究[J].有色金属(冶炼部分),2011(12):18-21.
LUO Zhong-shan1, ZHANG Hong-liang2, ZHANG He-hui2.Research on Preheating Carbon Anode by Flue Gas in Aluminum Reduction Cell[J].Nonferrous Metals (Extractive Metallurgy),2011(12):18-21.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号