本文已被:浏览 3317次 下载 40次
投稿时间:2011-03-24
投稿时间:2011-03-24
中文摘要: 在试验室条件下,对提钒尾渣压力成型工艺进行研究,考察煤粉配比、粘结剂配比、生石灰配比及成型压力等因素对提钒尾渣内配碳球团强度的影响,确定了最佳方案。结果表明,球团的强度可满足后续处理工艺的要求。并研究了配碳量、碱度、还原温度及还原时间与该种球团直接还原金属化率的关系。
Abstract:Under laboratory conditions, pressure forming process for vanadium tailings was investigated. The effecting factors, such as coal ratio, binder ratio, quicklime ratio and molding pressure, on pellets strength were studied and the optimum process parameters were determined. The results show that the strength of pellets can meet the requirement of follow-up processing. The relations between coal ratio, alkalinity, reduction temperature and time and the metallization percentage in the process of metalized pellet were also studied with experiments.
文章编号: 中图分类号: 文献标志码:
基金项目:
| Author Name | Affiliation |
| WU En-hui | Panzhihua College, Sichuan Province Engineering Research Center for Vanadium & Titanium Materials |
引用文本:
吴恩辉.提钒尾渣内配碳球团直接还原试验[J].有色金属(冶炼部分),2011(11):17-20.
WU En-hui.Experimental Study on Direct Reduction of Vanadium Tailings Carbon-Containing Pellets[J].Nonferrous Metals (Extractive Metallurgy),2011(11):17-20.
吴恩辉.提钒尾渣内配碳球团直接还原试验[J].有色金属(冶炼部分),2011(11):17-20.
WU En-hui.Experimental Study on Direct Reduction of Vanadium Tailings Carbon-Containing Pellets[J].Nonferrous Metals (Extractive Metallurgy),2011(11):17-20.

关注微信公众号