###
有色金属(冶炼部分):2011,(11):45-48
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
连续钨丝增强锆基块体金属玻璃变形过程中剪切带演化
(南京理工大学材料评价与优选设计教育部工程研究中心)
Evolution of Shear Bands of Tungsten Fiber Reinforced Zr-Based Bulk Metallic Glass Matrix Composite in Deformation Process
(Engineering Research Center of Materials Behavior and Design, Ministry of Education, Nanjing University of Science and Technology)
摘要
图/表
参考文献
相似文献
本文已被:浏览 3084次   下载 49次
投稿时间:2011-03-09               
中文摘要: 研究体积分数为60%的连续钨丝/Zr41.2Ti13.8Cu12.5Ni10Be22.5块体金属玻璃复合材料准静态压缩变形过程中剪切带的演化过程。发现在弹性变形段不形成剪切带,剪切带是在塑性变形过程中产生并发展,且剪切带的数量随着变形量的增加而增大,间距随着变形量的增加而减小;当间距减小到一定值时产生剪切裂纹并不断扩展,最终导致断裂破坏。
中文关键词: 块体金属玻璃  剪切带  变形  复合材料
Abstract:Evolution process of shear bands of tungsten fiber reinforced Zr-based bulk metallic glass matrix composite in deformation process was investigated. It is found that no shear band forms in the elastic stage, the shear band forms and develops in the plastic deformation process. Moreover, the number of shear bands increases with the increase of the deformation quantum, and the shear band spacing decreases with the increase of the deformation quantum. When the shear band spacing reaches the critical value, shear cracks occur and continuously extend, finally resulting in the fracture failure.
文章编号:     中图分类号:    文献标志码:
基金项目:国家自然科学基金资助项目(50871054);教育部博士点基金项目(20093219110035)
引用文本:
姜斐.连续钨丝增强锆基块体金属玻璃变形过程中剪切带演化[J].有色金属(冶炼部分),2011(11):45-48.
JIANG Fei.Evolution of Shear Bands of Tungsten Fiber Reinforced Zr-Based Bulk Metallic Glass Matrix Composite in Deformation Process[J].Nonferrous Metals (Extractive Metallurgy),2011(11):45-48.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号