本文已被:浏览 2468次 下载 35次
中文摘要: 采用不同锂源用碳热还原法合成LiFePO4正极材料,利用TG-DTA,XRD和SEM对前驱体、材料的晶体结构及表面形貌进行表征,通过充放电和循环伏安测试电化学性能。结果显示,以乙酸锂为锂源制得的样品颗粒粒径最小、电化学性能最佳。以C/20倍率充放电,首次放电比容量达到143.3mA?h/g。该样品具有稳定的循环行为,以C/10倍率循环15次后放电容量为初始值的98%。循环伏安曲线显示以乙酸锂为锂源合成的LiFePO4材料具有良好的可逆性,极化小。
Abstract:The LiFePO4 cathode material is synthesized with different Li sources by carbothermal reduction methods, and the crystalline structure and morphology of the precursor and cathode material are characterized by TG-DTA and X-ray powder diffraction and the electrochemical properties are investigated by charge-discharge and CV tests. The results show that the finest particle size and the optimal electrochemical performance are achieved for the sample synthesized with CH3COOLi?2H2O. And a high capacity of 143.3 mA?h/g is delivered at the C/20 rate. The sample also displays a stable cycle-life, and even after 15 cycles, the discharge capacity is still 98% of initial capacity at C/10 rate. It is show by CV tests that the reversibility and the polarization of the sample synthesized with CH3COOLi?2H2O are the best and the smallest.
keywords: inorganic nonmetal material lithium iron phosphate CH3COOLi?2H2O carbothermal reduction cathode material
文章编号: 中图分类号: 文献标志码:
基金项目:河北省自然科学基金资助项目(B2008000758)
| 作者 | 单位 |
| 卜立敏 | 燕山大学 环境与化学工程学院,河北秦皇岛 066004 |
| 秦秀娟 | 燕山大学 环境与化学工程学院,河北秦皇岛 066004 |
| 孙学亮 | 燕山大学 环境与化学工程学院,河北秦皇岛 066004 |
| 吴 伟 | 燕山大学 环境与化学工程学院,河北秦皇岛 066004 |
引用文本:
卜立敏,秦秀娟,孙学亮,吴 伟.不同锂源对LiFePO4正极材料电化学性能的影响[J].有色金属(冶炼部分),2011(7):56-60.
BO Li-min,QIN Xiu-juan,SUN Xue-liang,WU Wei.Effect of Different Li Sources on Electrochemical Performance of LiFePO4 Cathode Material[J].Nonferrous Metals (Extractive Metallurgy),2011(7):56-60.
卜立敏,秦秀娟,孙学亮,吴 伟.不同锂源对LiFePO4正极材料电化学性能的影响[J].有色金属(冶炼部分),2011(7):56-60.
BO Li-min,QIN Xiu-juan,SUN Xue-liang,WU Wei.Effect of Different Li Sources on Electrochemical Performance of LiFePO4 Cathode Material[J].Nonferrous Metals (Extractive Metallurgy),2011(7):56-60.

关注微信公众号