本文已被：浏览 2771次 下载 25次
中文摘要: 采用正交实验法研究了电解铜和阴极板结合强度的优化范围，从而确定了合适的不锈钢表面状态和相应的表面处理方法，也为后续配备机械剥离设备提供初步理论基础。结合强度正交实验结果表明，影响阴极铜和不锈钢结合强度的主次因素为：表面粗糙度、表面处理方法和表面处理时间。就单一因素的影响来看，表面粗糙度的最优水平为采用280～320^#(0．045～0．055mm)砂纸打磨；表面处理方法的最优水平是电解法表面处理；表面处理时间的最优水平是15min。
中文关键词: 铜 电解精炼 不锈钢阴极板 结合强度 剥离机械
Abstract:The optimal range of adhesion strength and the optimal surface status and corresponding surface treating methods are given by means of orthogonal experiment. Meanwhile, the preliminary theoretical basis will be offered for preparing the stripping machine. The results of orthogonal experiment show the effecting factors in order are: surface roughness, surface treatment means and the time. As far as the single factor is concerned, the optimal level of surface roughness is burnished by sand paper (0.045-0.055mm) . The optimal level of surface treatment is electrolytic treatment, and the time is 15 minutes.
文章编号： 中图分类号：TF811 文献标志码：
基金项目:云南省“十五”科技攻关项目(编号2002GG08)
XUE Fang-qin,YANG Xiao-qin,XU Rui-dong,GUO Zhong-cheng,HUANG Tai-xiang,HUA Hong-quanKunming University of Science , Technology,Kunming ,China Yunnan Copper Corporation Limited,Kunming ,China
XUE Fang-qin,YANG Xiao-qin,XU Rui-dong,GUO Zhong-cheng,HUANG Tai-xiang,HUA Hong-quan
Kunming University of Science and Technology,Kunming 650093,China Yunnan Copper Corporation Limited,Kunming 650102,China
引用文本：
薛方勤,杨小琴,徐瑞东,郭忠诚,黄太祥,华宏全.铜电解精炼不锈钢阴极板的结合强度研究[J].有色金属（冶炼部分）,2003(6):10-12,20.
.Study on Adhesion Strength between Stainless Steel Cathode and Copper in Copper Electrolytic Refining[J].Nonferrous Metals (Extractive Metallurgy),2003(6):10-12,20.
薛方勤,杨小琴,徐瑞东,郭忠诚,黄太祥,华宏全.铜电解精炼不锈钢阴极板的结合强度研究[J].有色金属（冶炼部分）,2003(6):10-12,20.
.Study on Adhesion Strength between Stainless Steel Cathode and Copper in Copper Electrolytic Refining[J].Nonferrous Metals (Extractive Metallurgy),2003(6):10-12,20.
关注微信公众号