###
有色金属(冶炼部分):2011,(3):31-33
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
难处理复杂金矿循环流态化焙烧提金技术
(1.北京矿冶研究总院;2.新疆星塔矿业有限公司)
Roasting Technology of Refractory and Complex Gold Ore Using Circulating Fluid Bed
(1.Beijing General Research Institute of Mining & Metallurgy;2.Xinjiang Xingta Kuangye Co. Ltd.)
摘要
图/表
参考文献
相似文献
本文已被:浏览 3272次   下载 15次
投稿时间:2010-08-10               
中文摘要: 300 t/d循环流态化焙烧提金示范工程投产运行状况及提金结果表明,采用循环流态化焙烧含金物料时,气固混合剧烈,物料温度分布均匀、停留时间长,碳燃烧充分完全。对含金平均品位在4~8 g/t的复杂含砷低硫精矿尾渣,通过循环流态化焙烧——氰化浸出后,渣金品位下降至平均1.5~2.5 g/t,金回收率75%~85%,焙烧温度750 ℃,煤耗3.5%左右。
Abstract:300 t/d pliot of circulating fluid bed(CFB) roaster was established. According to operation conditions and Au extraction results, in CFB roaster, it shows that gas and solid has violent mixing reaction, the temperature distribution is uniform and retaining time is longer, and the carbon in minerals burns completely. For the tailings of arsenic-bearing low-sulphur concentrations with average Au 4~8g/t, the residues Au decreases to average 1.5~2.5 g/t by CFB roasting and cyanide leaching, and the Au extraction is 75%~85% by roasting temperation of 750℃ and coal consumption of about 3.5%.
文章编号:     中图分类号:    文献标志码:
基金项目:“十一五”国家科技攻关计划项目(2006BAB02A15)
引用文本:
李云,王云,袁朝新,孙建伟,黄海辉.难处理复杂金矿循环流态化焙烧提金技术[J].有色金属(冶炼部分),2011(3):31-33.
LI Yun,WANG Yun,YAN Chao-xin,SUN Jian-wei,Hai-hui.Roasting Technology of Refractory and Complex Gold Ore Using Circulating Fluid Bed[J].Nonferrous Metals (Extractive Metallurgy),2011(3):31-33.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号