本文已被:浏览 3340次 下载 17次
投稿时间:2010-08-05
投稿时间:2010-08-05
中文摘要: 以氯化铝、金属铝粉、氧化钇、冰醋酸为原料,采用溶胶—凝胶法制备了钇铝石榴石纤维。研究氯化铝和金属铝粉比例以及醋酸的加入,对前驱溶胶纺丝性能的影响。结果表明,加入醋酸可得到纺丝性能良好的前驱胶体溶胶。凝胶纤维在1 000 ℃煅烧2 h,全部结晶为钇铝石榴石,纤维直径10~40 μm。
Abstract:The yttrium aluminum garnet fibers were prepared by sol-gel method using aluminum chloride,aluminum powder, yttrium oxide,acetic acid as raw materials. The effect of the ratio of aluminum and aluminum chloride, the addition of acetic acid on sol spinning were studied. The result indicated the spinning precursor sol was obtained when acetic acid was added to the precursor. Yttrium aluminum garnet fibers were obtained under sintering at 1000℃ for 2 hours, with 10~40μm in diameter.
keywords: Yttrium aluminum garnet Fiber Sol-Gel method
文章编号: 中图分类号: 文献标志码:
基金项目:陕西省自然科学基金资助项目( S2010GY755)
引用文本:
谭宏斌,张伟,郭从盛.溶胶-凝胶法制备钇铝石榴石纤维[J].有色金属(冶炼部分),2011(3):39-41.
TAN Hong-bin,ZHANG Wei,GUO Cong-sheng.Preparation of Yttrium Aluminum Garnet Fibers by Sol-Gel Method[J].Nonferrous Metals (Extractive Metallurgy),2011(3):39-41.
谭宏斌,张伟,郭从盛.溶胶-凝胶法制备钇铝石榴石纤维[J].有色金属(冶炼部分),2011(3):39-41.
TAN Hong-bin,ZHANG Wei,GUO Cong-sheng.Preparation of Yttrium Aluminum Garnet Fibers by Sol-Gel Method[J].Nonferrous Metals (Extractive Metallurgy),2011(3):39-41.

关注微信公众号