###
有色金属(冶炼部分):2011,(3):13-15
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
痕量钴的浸出工艺研究
(河南科技大学材料科学与工程学院)
Study on Trace Quantity Cobalt Extraction
(Henan University of Science and Technology)
摘要
图/表
参考文献
相似文献
本文已被:浏览 2638次   下载 18次
投稿时间:2010-07-13               
中文摘要: 研究了痕量钴浸出试验的工艺条件。正交试验结果表明酸度对钴浸出率的影响最大,其次是反应时间,最后才是反应温度,且酸度对浸出率的影响远大于反应时间和反应温度。硫酸浓度和反应温度的提高有助于浸出率的提高,在温度100 ℃,酸度45%,反应时间3 h时,钴浸出率达到91.56%。在酸过量的情况下,提高酸的加入量对浸出率影响不大。
中文关键词: 钴  正交试验  浸出率
Abstract:The leaching conditions from trace quantity of cobalt is studied.The orthogonal test result shows that acidity of H2SO4 contribut the strongest influence on cobalt leaching rate, the following is extraction time and temperature, and the influence of acidity is much more stable than that of extraction time and temperature. Raise acidity of H2SO4 and extraction temperature can improve leaching rate. The cobalt leaching rate can reach 91.56% on the condition of 100 ℃, 45% acidity and 3 h. When H2SO4 is excess, the excessed amount of H2SO4 has no obvious effect on cobalt leaching rate.
文章编号:     中图分类号:    文献标志码:
基金项目:河南省科技攻关项目(001190403)
引用文本:
胡威,黄兴远.痕量钴的浸出工艺研究[J].有色金属(冶炼部分),2011(3):13-15.
HU Wei,HUANG Xing-yuan.Study on Trace Quantity Cobalt Extraction[J].Nonferrous Metals (Extractive Metallurgy),2011(3):13-15.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299752/63299758

联系我们

电话:010-63299752/63299758

传真:010-63299744

QQ:XXXXXXX

Email:ysyl@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地18区23号楼

关注微信公众号