本文已被:浏览 3238次 下载 55次
投稿时间:2010-06-11
投稿时间:2010-06-11
中文摘要: 针对某氧化钼精矿钼含量低、脉石矿物方解石含量高的特点,采用碳酸钠溶液高压浸出新工艺处理该原料,最佳浸出条件为:碳酸钠用量为理论量1倍、浸出时间1 h、浸出温度160 ℃、液固比1.5。最佳浸出条件下,钼浸出率大于97%。
Abstract:According to the characters that low content of molybdenum and high content of calcspar in the oxidation molybdenum concentrates, the high pressure leaching process was adopted. In the leaching process sodium carbonate was used as leaching regent. The results showed that the optimal quantity of sodium carbonate was 1 times of its theoretical quantity, the optimal leaching time was 1 h, the optimal leaching temperature was 160 ℃ and the liquid-solid ratio was 1.5. The leaching rate was more than 97% under the optimal leaching condition.
文章编号: 中图分类号: 文献标志码:
基金项目:
引用文本:
曹耀华,刘红召,高照国,杨绍文.低品位氧化钼精矿高压浸出新工艺研究[J].有色金属(冶炼部分),2011(1):5-8.
CAO Yao-Hua,LIU Hong-zhao,GAO Zhao-guo,YANG Shao-wen.Rresearch on Molybdenum Extraction from Oxidation Molybdenum Concentrates[J].Nonferrous Metals (Extractive Metallurgy),2011(1):5-8.
曹耀华,刘红召,高照国,杨绍文.低品位氧化钼精矿高压浸出新工艺研究[J].有色金属(冶炼部分),2011(1):5-8.
CAO Yao-Hua,LIU Hong-zhao,GAO Zhao-guo,YANG Shao-wen.Rresearch on Molybdenum Extraction from Oxidation Molybdenum Concentrates[J].Nonferrous Metals (Extractive Metallurgy),2011(1):5-8.

关注微信公众号